Jump to content
SAU Community

Recommended Posts

Hey everyone.,

just wondering does any one have a lightened flywheel in their car, and did it make a difference/ what kind of difference did it make.

im trying to decide whether to get a lightened flywheel when i put a new clutch in or just to get my current flywheel machined.

thanks

Link to comment
https://www.sau.com.au/forums/topic/185565-lightened-flywheels/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

yes, do it if you're changing your clutch. i'm kicking myself because i didnt.

never ever lighten your stock flywheel, it will shatter and most probably cut your legs off. they will lightly machine it to get the surface flat when you change your clutch though - which is totally fine.

a quick question though cara, why do you want to change it? are you going to be circuit racing? because that's really the only place you'll ever make use of it in high rpm. a lightened flywheel will reduce torque, getting off from traffic lights becomes a hassle, need to rev more to get going = more fuel, changing gears becomes a mission as the revs drop off too quickly, some gearboxes have been known to vibrate as flywheels supposedly absorb a fair bit of the engine's vibrations (unconfirmed), going up hills becomes an issue apparently too.

far too many negatives for your street applications to even consider it. have a long think about where you'd like to go with the car and plan your mods out accordingly.

any questions ask away, i've researched into it fairly extensively as i'll be putting one in when my new clutch goes (which wont really be anytime soon :P)

eug

im changing my clutch cause ive burnt it a couple of times and im also doing the go to whoa at gazzants in oct and dont know whether it will survive LOL.

and was jsut thinking well if i do the clutch maybe do the flywheel as well

hey cara,

This topic has come up a few times and i've read a few of the previous threads, i think from memory theres a few different weighted lighened flywheels, and each of which are suited to different styles of driving, i'm quite sure if you get the one which is only a little bit lighter than the stock one it will be benifitial to daily driving, as your car will have more accelaration, i think someone came up with some equation that like 1 kg rotational weight reduction is equivelent of 10kg of car weight (they arnt the correct figures but something like that), but you will loose some toqure, i also remember some people who said they have them didnt notice much if any of a difference on petral consumption although there were a few people who said the oppisite.

I think they are well worth the money if you research the right one for what you want to do.

i dont have one in my car, i was thinking about getting one when i burnt my clutch out but then i didnt have the cash to fork out at the time n i dont really think they are enough of a gain to warrent dropping the trans just for changing the flywheel.

DO IT!!, i havent done the flywheel but i just put an underdrive crank pulley on the 35 which works under the same principles as the lightened flywheel and OMG!!! the car is so much more responsive... a hell of alot quicker overall!! Downsides is it stalls a little easier but if u can put up with it (which isnt really that bad anyway) go for gold ull love it!! cant wait till i destroy the clutch so i can lighten mine... i have access to lathes so i will be lightening the stocko one...

i dont know if its any use to you, but when i had a st162 celica i had a fair bit taken off the stock flywheel and i noticed a massive difference. Not so much the stalling problems but definately the torque disappearing. But it was definately much more responsive and rev happy and on a flat road it was alot quicker, but as soon as it was uphill it was slower.

Edited by R34GTFOUR
cant wait till i destroy the clutch so i can lighten mine... i have access to lathes so i will be lightening the stocko one...

I'd suggest against it. Lightweight flywheels are relatively cheap for our cars, and there's no way you can get it light enough on a lathe to be "perfect".

I've got a JUN flywheel in my Z33, and its about half the weight of the stock unit at 14lbs. Everyone was telling me the car was going to be a pig to drive, but after I installed it all I could think was "it could be lighter". When my clutch dies, I'm probably going to get a Tilton unit, coupled with their 7lbs flywheel.

The car the JUN flywheel came out of had the engine rebuilt to beyond Nismo S1 spec (lightweight forged internals to rev the VQ to 8000RPM, big cams, head work, etc) and in his car it was an issue. Unless you're going to build the engine to sacrifice all that low end, even halving the weight of the stock flywheel isn't enough. What's the likelihood that you can shave off 60-75% of the flywheel without putting your legs in danger?

This information doesn't apply directly to MissR34 since her car won't have the surfeit of low-end torque our cars do. But I'd say a lightweight flywheel is definitely worth doing if you've got everything in pieces anyway. If you don't drive the car in anger where that instant revvability is desired over the loss of low-end pulling power and inevitable rattle, just get a mildly lighter flywheel.

Now this is a subject I'm very interedsted in, as I've just brought a toda Light weight flywheel (4.4kg) for my R33 GTS25 (not yet installed). The reason I brought it is as I circuit race the car and find the car a little unresponsive when coming out of the corners, seems to take forever to get the heavy beast moving, I thought by installing a lighter flywheel that I might just be able to liven it up a bit.

Now reading this post I'm a little concerned that I might have gone too light with the flywheel as I still drive the car on the road. My car is already a little frustrating to drive at low speeds and in traffic thanks to a button clutch. Any idea how the button clutch/ lightweight flywheel combo will be like to drive on the road?

flywheel (4.4kg)

I circuit race the car and find the car a little unresponsive when coming out of the corners,

Any idea how the button clutch/ lightweight flywheel combo will be like to drive on the road?

how much was the toda flywheel? and who'd you order it through? the lightest one i've seen (and frankly the only one i was interested in due to its weight) is the 4.8kg cusco. didn't know there even was a brand called toda

i'm pretty much in the same position as you, i also circuit race and find it quite lacking in punch coming out of corners.

no idea on a button/fly combo, but i'd expect to have jerky take offs and it might catch you off guard and stalling when you're being lazy.

by all means cara go for it if you're taking the clutch out, it saves dropping the gearbox again. but my personal opinion would be to go all out with the lightest and deal with the annoyance or none at all. if you're not racing or doing some form of motorsport than it's not really THAT necessary.

p.s. - i'm sure despite the initial awkwardness any driver with half a mind will quickly adapt and it will simply become normal after a few days/weeks

how much was the toda flywheel? and who'd you order it through? the lightest one i've seen (and frankly the only one i was interested in due to its weight) is the 4.8kg cusco. didn't know there even was a brand called toda

I picked it up 2nd hand for $450, here's a link http://www.modyourcar.com.au/product_info....roducts_id=1430 with a bit of info on the new item, they advertise the flywheel as 4.8kg, I've weighed my one a couple of times and I got 4.4kg may be my scales are out???

Edited by skyla

is that NZD$450 second hand? equals to roughly AUD$400, which is pretty decent

that side has AUD$838.95 - which is far too expensive.

rough quote on a cusco 4.8kg is AUD$460 ($500 max?)

hmm... tempting

- drop gearbox, not to mention "hey why not do the clutch again".

- we're looking $1000-1200 :|

Yep in NZD. It will be a little while before the new flywheel goes into my car, but hope to have it in the car by early next year for a club track day, I hope to give a couple of the turbo boys a bit of a run for there money :thumbsup:

Edited by skyla

That's the way Rach! I think the N/A team will put on a good showing :thumbsup:

I need to weigh the TODA flywheel that's in my rallycar. It's full of holes and feels a little too light for the 2ltr. Hopefully the new engine build will fix that.

Funny thing tho, my road car (also RB20DE) eats the rallycar for breakfast under acceleration anywhere in the rev range and it still has the std flywheel.

Rach, before you put they flywheel in do some standing sprints (you still have a timer thingy right?) and some more after. Want to see how the numbers change.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...