Jump to content
SAU Community

Whoop Ass Wednesday 19th Sept

Ashy Larry

By Ashy Larry,
in Events

 Share

Recommended Posts

RB MAN Contributor

RB MAN

Posted
Posted (edited)

went shit, ET time was not to good but speed was not bad! if i could have found traction time would of been alot better! semi slicks FTW next time. anyways

ET.13.5

speed.186.41 kmh (115.83mph)

60': 2.538sec - shit no traction

car: 33GTST

:D

Edited by RB MAN
RB MAN Contributor

RB MAN

Posted
Posted
There's a 12.2 waiting to be had on street tyres if you get the launch right! Well done.

It was so not easy hey, who ever drag racing is easy is wrong well with power it is really hard especially with street tyres.

anyways it was my frist time down there! practice makes perfect i would say!

12.2 would be very very nice hehe

I GOT RICE Enthusiast

I GOT RICE

Posted
Posted

first time i ever been down to the drags and i entered my 33 GTST in...

she's running an average 283hp @ 13psi...

guess what i got on my first run????

15.1!!!!!! LOL, with a reaction time of 1.03 seconds, lol. I had no clue what i was doing and had no clue the yellow lights dumped down so quickly. I panicked and just slammed the clutch and since i didnt dry my tires (there only street ones so i thought it wouldnt be that much difference) i lost all of first in about half a second so i slammed it in second and i already lost a good second out of my time... OUCH

second run i did still an average of 14.3 and since i saw a few races before i ran the second time, i got to tell when to start releasing the clutch so i got a reaction time of 0.04 seconds.

i only ran twice coz i got there in peak hour where is took an hour to get scrutenised then the long wait for the turbo's to go through.

but yer, definantly will go next week and have another crack at it

mitchy_ Grand Master

mitchy_

Posted
Posted
first time i ever been down to the drags and i entered my 33 GTST in...

she's running an average 283hp @ 13psi...

guess what i got on my first run????

15.1!!!!!! LOL, with a reaction time of 1.03 seconds, lol. I had no clue what i was doing and had no clue the yellow lights dumped down so quickly. I panicked and just slammed the clutch and since i didnt dry my tires (there only street ones so i thought it wouldnt be that much difference) i lost all of first in about half a second so i slammed it in second and i already lost a good second out of my time... OUCH

second run i did still an average of 14.3 and since i saw a few races before i ran the second time, i got to tell when to start releasing the clutch so i got a reaction time of 0.04 seconds.

i only ran twice coz i got there in peak hour where is took an hour to get scrutenised then the long wait for the turbo's to go through.

but yer, definantly will go next week and have another crack at it

good work on the 14.3, my door went faster on your car than mine, hahah

300rwhp and all i managed was a 15.1 (albeit the turbo had a VERY blown seal at that stage...)

edit: also ryan, your car wont be stock boost if you have fmic, exhaust, pod, etc.. that all raises the boost regardless of if you have a controller or not.

you're probably running about 10psi.

Mr_GaZZa Rising Star

Mr_GaZZa

Posted
Posted
good work on the 14.3, my door went faster on your car than mine, hahah

300rwhp and all i managed was a 15.1 (albeit the turbo had a VERY blown seal at that stage...)

edit: also ryan, your car wont be stock boost if you have fmic, exhaust, pod, etc.. that all raises the boost regardless of if you have a controller or not.

you're probably running about 10psi.

HEY MITCH!!!!

um i heard if ur stock boost wif a FMIC, u run lower boost... or same but u got more pipe to fill =/

i dunno

:) i am expecting mid 13's in my 268hp Line!! goes HARD

:wave:

mitchy_ Grand Master

mitchy_

Posted
Posted

lol, hi gary.

FMIC might be the case, but the exhaust usually pushes the boost up.

my car used to run 10psi with 450x250x60 fmic, pod, and exhaust, with no controller/bleed valve/etc. at all :wave:

mid/low 13's is pretty achievable in a R33 with the usual mods, you just need to work on your launches. my first (and subsequently last launch of the night, and the car) resulted in wheel spin all the way through first and second gear.

32vspecII Mentor

32vspecII

Posted
Posted
HEY MITCH!!!!

um i heard if ur stock boost wif a FMIC, u run lower boost... or same but u got more pipe to fill =/

i dunno

:banana: i am expecting mid 13's in my 268hp Line!! goes HARD

:nyaanyaa:

the stock fmic is increadibly restrictive

you will run a bit more boost when its removed for a proper one

Nismo_God Veteran

Nismo_God

Posted
Posted

managed a 13.700 with dead stock car except exhaust on 19" rims.....

now i run a 13 flat with exhaust, fmic, boost 11psi.....oh and an old set of nittos....

its all in the launch.....aim for below 2.2 street tyres and below 2 with drag radials....

anyone want to buy a set of used drag radials that have a few meets left in them PM me....i just bought a gtr and wont be needing them anymore....

ceffyboy Community Regular

ceffyboy

Posted
Posted

Im still yet to take my r32 down but judging by u guys i should easily do a low 14. ive just got a 3in De-cat exhaust with 600x300x75fmic and im running 13psi. do u reckon very high 13's are possible with the right launch?

clkngezz Enthusiast

clkngezz

Posted
Posted

took my car first time ever i went there, 1st run 14.8 2nd run 14.099 third run 15.2 <--- couldnt get into third 3rd, my main problem was traction in 1st and second, and runnin wierd boost from .3 bar to infinite so car was runnin r+r depending on gear running actuator ONLY lol, once i get car to run 12psi again i might have half a chance to get into the 13s

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...