Jump to content
SAU Community

Whoop Ass Wednesday 19th Sept

Ashy Larry

By Ashy Larry,
in Events

 Share

Recommended Posts

RB MAN Contributor

RB MAN

Posted
Posted (edited)

went shit, ET time was not to good but speed was not bad! if i could have found traction time would of been alot better! semi slicks FTW next time. anyways

ET.13.5

speed.186.41 kmh (115.83mph)

60': 2.538sec - shit no traction

car: 33GTST

:D

Edited by RB MAN
RB MAN Contributor

RB MAN

Posted
Posted
There's a 12.2 waiting to be had on street tyres if you get the launch right! Well done.

It was so not easy hey, who ever drag racing is easy is wrong well with power it is really hard especially with street tyres.

anyways it was my frist time down there! practice makes perfect i would say!

12.2 would be very very nice hehe

I GOT RICE Enthusiast

I GOT RICE

Posted
Posted

first time i ever been down to the drags and i entered my 33 GTST in...

she's running an average 283hp @ 13psi...

guess what i got on my first run????

15.1!!!!!! LOL, with a reaction time of 1.03 seconds, lol. I had no clue what i was doing and had no clue the yellow lights dumped down so quickly. I panicked and just slammed the clutch and since i didnt dry my tires (there only street ones so i thought it wouldnt be that much difference) i lost all of first in about half a second so i slammed it in second and i already lost a good second out of my time... OUCH

second run i did still an average of 14.3 and since i saw a few races before i ran the second time, i got to tell when to start releasing the clutch so i got a reaction time of 0.04 seconds.

i only ran twice coz i got there in peak hour where is took an hour to get scrutenised then the long wait for the turbo's to go through.

but yer, definantly will go next week and have another crack at it

mitchy_ Grand Master

mitchy_

Posted
Posted
first time i ever been down to the drags and i entered my 33 GTST in...

she's running an average 283hp @ 13psi...

guess what i got on my first run????

15.1!!!!!! LOL, with a reaction time of 1.03 seconds, lol. I had no clue what i was doing and had no clue the yellow lights dumped down so quickly. I panicked and just slammed the clutch and since i didnt dry my tires (there only street ones so i thought it wouldnt be that much difference) i lost all of first in about half a second so i slammed it in second and i already lost a good second out of my time... OUCH

second run i did still an average of 14.3 and since i saw a few races before i ran the second time, i got to tell when to start releasing the clutch so i got a reaction time of 0.04 seconds.

i only ran twice coz i got there in peak hour where is took an hour to get scrutenised then the long wait for the turbo's to go through.

but yer, definantly will go next week and have another crack at it

good work on the 14.3, my door went faster on your car than mine, hahah

300rwhp and all i managed was a 15.1 (albeit the turbo had a VERY blown seal at that stage...)

edit: also ryan, your car wont be stock boost if you have fmic, exhaust, pod, etc.. that all raises the boost regardless of if you have a controller or not.

you're probably running about 10psi.

Mr_GaZZa Rising Star

Mr_GaZZa

Posted
Posted
good work on the 14.3, my door went faster on your car than mine, hahah

300rwhp and all i managed was a 15.1 (albeit the turbo had a VERY blown seal at that stage...)

edit: also ryan, your car wont be stock boost if you have fmic, exhaust, pod, etc.. that all raises the boost regardless of if you have a controller or not.

you're probably running about 10psi.

HEY MITCH!!!!

um i heard if ur stock boost wif a FMIC, u run lower boost... or same but u got more pipe to fill =/

i dunno

:) i am expecting mid 13's in my 268hp Line!! goes HARD

:wave:

mitchy_ Grand Master

mitchy_

Posted
Posted

lol, hi gary.

FMIC might be the case, but the exhaust usually pushes the boost up.

my car used to run 10psi with 450x250x60 fmic, pod, and exhaust, with no controller/bleed valve/etc. at all :wave:

mid/low 13's is pretty achievable in a R33 with the usual mods, you just need to work on your launches. my first (and subsequently last launch of the night, and the car) resulted in wheel spin all the way through first and second gear.

32vspecII Mentor

32vspecII

Posted
Posted
HEY MITCH!!!!

um i heard if ur stock boost wif a FMIC, u run lower boost... or same but u got more pipe to fill =/

i dunno

:banana: i am expecting mid 13's in my 268hp Line!! goes HARD

:nyaanyaa:

the stock fmic is increadibly restrictive

you will run a bit more boost when its removed for a proper one

Nismo_God Veteran

Nismo_God

Posted
Posted

managed a 13.700 with dead stock car except exhaust on 19" rims.....

now i run a 13 flat with exhaust, fmic, boost 11psi.....oh and an old set of nittos....

its all in the launch.....aim for below 2.2 street tyres and below 2 with drag radials....

anyone want to buy a set of used drag radials that have a few meets left in them PM me....i just bought a gtr and wont be needing them anymore....

ceffyboy Community Regular

ceffyboy

Posted
Posted

Im still yet to take my r32 down but judging by u guys i should easily do a low 14. ive just got a 3in De-cat exhaust with 600x300x75fmic and im running 13psi. do u reckon very high 13's are possible with the right launch?

clkngezz Enthusiast

clkngezz

Posted
Posted

took my car first time ever i went there, 1st run 14.8 2nd run 14.099 third run 15.2 <--- couldnt get into third 3rd, my main problem was traction in 1st and second, and runnin wierd boost from .3 bar to infinite so car was runnin r+r depending on gear running actuator ONLY lol, once i get car to run 12psi again i might have half a chance to get into the 13s

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Good luck on the weekend mate
    • Duncan
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Duncan · Posted

      Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Duncan
      New

      By Duncan · Posted

      Welcome to SAU, what are you looking at buying?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...