Jump to content
SAU Community

Crunch

charlie25T
 Share

Recommended Posts

charlie25T Proficient

charlie25T

Posted
Posted

Hey people

CAR: Nissan Skyline R33 GTS25T

MODS: Fmic, Bov, EBC, Air filter

After i installed my fmic it is now crunching in 5th. I has never cruched it 5th not really at high revs but aroung the 100km mark....................do you think is clutch problem, or do i need a fuel pump, or what .....

ideas need

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/
Share on other sites
Yawn Mentor

Yawn

Posted
Posted

I doubt the FMIC install affected your crunching in 5th. Probably just a coincidence, does it do it every single time you shift into 5th? Try double clutching and see if it helps.

Also, what does a fuel pump have to do with your gears crunching? :mellow:

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3367858
Share on other sites
charlie25T Proficient

charlie25T

Posted
  • Author
Posted
I doubt the FMIC install affected your crunching in 5th. Probably just a coincidence, does it do it every single time you shift into 5th? Try double clutching and see if it helps.

Also, what does a fuel pump have to do with your gears crunching? :mellow:

I dunno about that the fuel pump has to do........just a thought

double clutch it ............... i know how to double clutch

but what double clutch in 5th

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3367880
Share on other sites
charlie25T Proficient

charlie25T

Posted
  • Author
Posted
how can your car idle at 6000rpm? do you mean 600rpm? coz 600 is normal.

NA NA NA NA SORRY BOYS

I MEANT 600

my idle needs to be a 750

reckon my idle need to be up

i was also told it might also be a spark plug problem

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3369895
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

You car idling at 600rpm has nothing to do with gears crunching in 5th dude.

It also (the crunching) has nothing to do with a FMIC.

5th crunching is the synchro's letting go or the clutch being a bit so-so possibly in some way.

Totally unrelated to the points you've raised here

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3370035
Share on other sites
charlie25T Proficient

charlie25T

Posted
  • Author
Posted
You car idling at 600rpm has nothing to do with gears crunching in 5th dude.

It also (the crunching) has nothing to do with a FMIC.

5th crunching is the synchro's letting go or the clutch being a bit so-so possibly in some way.

Totally unrelated to the points you've raised here

thank for that.................. Well i have Xtreme heavy duty cutch ....and my pedal is a bit high

this is wierd cause it only happen when it is above 100km not under

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3370161
Share on other sites
made_guy Experienced

made_guy

Posted
Posted (edited)

just wear on you synchro's man. try double clutching as mentioned. i don't know enough to explain it, but it feels like releasing the clutch and then pushing it in again gives things a chance to align more nicely than doing the whole change in one motion.

e.g.

clutch > de-select 4th > neutral (clutch position same as when de-selecting 4th) > select 5th > release clutch [things haven't had a chance to re-align from a neutral point]

v

clutch > de-select 4th > release clutch > true neutral > clutch (fresh clutch engagement :P ) > select 5th > release clutch

[things have hit neutral without the clutch affecting it - the best starting point to select any gear. it's just a more box-friendly and often a more solid engagement]

remember 5th is also possibly the least 'sure holding' gear in your gearset and in worn boxes can just slip out of gear. think of it as if you're rock climbing and 5th is the last hand hold and you have to stretch and grab it with just the tips of your fingers... errm.. [note to self, shut the f*ck up with all these weird analogies you come up with!?!?]

Edited by made_guy
Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3373582
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      R34 Skyline Sunroof Won't Tilt/Vent

      By GTSBoy · Posted

      Something's broken.
    • PranK
      Shoota's R33 GT-R RB30/26

      By PranK · Posted

      It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • ShezzDogs
      R34 Skyline Sunroof Won't Tilt/Vent

      By ShezzDogs · Posted

      Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
×
×
  • Create New...