Jump to content
SAU Community

New Bov Troubles

Krimz

By Krimz,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

Krimz Collaborator

Krimz

Posted
Posted

Hey guys I got a 96 S2 Gtst

Just got a Turbosmart supersonic bov and adapter and all was going good for a couple days...

Then just tonight i gave it a few revs standing still n noticed to the revs droped a lil bit lower than usaul then sometimes when i take off then netrual it till i stop it stalls? I have played around with the tension of the Bov as it says to do so but cant seem to find the right spot for it. I dont understand why it doing it now, was ok last couple of days, any thoughts?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/186491-new-bov-troubles/
Share on other sites
blitz r33 Collaborator

blitz r33

Posted
Posted

it happened to me when i got my turbosmart type 2 veeport blowoff valve.

no matter how hard you get the tension it will keep stalling.

if you have a stock computer,then thats the reason it stalls cause the bov vents and the computer is only tuned for the stock bov which re-circulates it.

i ended up putting my stock one back on and no more stalling or you could get a good ecu $1500 and get it tuned for it.

jimmytim Collaborator

jimmytim

Posted
Posted
I dont know if you want to stall in the middle of an intersection with a huge semi-trailer heading straight towards you...

Or on a freeway...

Is ur life worth a little "vroom choo?"

One of our family friend died because of that (in his brand new manual Audi, left his wife and children....)

Krimz Collaborator

Krimz

Posted
  • Author
Posted (edited)

It only stalls when i stop sharply, after ive bin driving for a long time. eg, i went out for a spin last night for a couple hours, all goin good.. then went for sum maccas, pulled into drive thru braked put foot on clutch then stall. then had a lil trouble wif idle, then when back on road again all good.

You do point out a good note thought.

Thats no good jimmytim, sorry to hear that.

Edited by Krimz
  • 2 weeks later...
Krimz Collaborator

Krimz

Posted
  • Author
Posted

All is good now, I made a new gasket for the BOV and sealed it with some gasket goo also, and thorughly cleaned out throtle body etc. Running better than ever now :) Iv tried so hard to make it stall but all is good, and no idle troubles.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...