Jump to content
SAU Community

Recommended Posts

Hi all,

I seem to remember a thread on this website from a mobile mechanic that came to your house and removed and replaced your turbos for a very reasonable price. Can't recall if it was in the WA section or NSW section though. I've searched the entire website for mobile mechanics, turbo fitting, etc but I can't find it again. I need whip my turbos off and replace them with some others as soon as I can. If anyone can remember the thread and point me to it, or knows a mobile mechanic who does that sort of thing I would really appreciate it if you could let's know.

Regards :D

Link to comment
https://www.sau.com.au/forums/topic/186567-mobile-mechanic-turbo-fitting/
Share on other sites

The problem with what you are proposing is that you are expecting the job to go smoothly and be left with a running car after "x" hours or so work by the machanic.

In reality, the machanic has no way of knowing that the turbos you have are indeed a true "bolt-on" affair and that ALL of the required parts (including gaskets, crush washers etc) are available for him. There is also the possibility that exhaust studs may snap or he may find other issues that should logically be dealt with (eg water or oil connectors leaking) at the same time.

In an ideal world, it would all go smoothly as you hope. In reality there will probably be minor "issues" that crop up that are best (and can be quickly) dealt with in fully equipped workshop.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...