Jump to content
SAU Community

What Video Camera To Buy?

Trust33

By Trust33,
in Photography

 Share

Recommended Posts

Trust33 Grand Master

Trust33

Posted
Posted

Hi peeps.

I need help on what video camera to buy.

I just bought a panansonic hdd 30gb job.>>GO HERE FOR VID CAMERA<<

After a little use i decided to have a look at the quality of the film on the computer.It was definently not what i had expected.when you look through the lcd screen you think it will be good but when it comes to full view,to me i have seen better quality tape camcorders,i cant see what all of the rage is about.sure it is convenient to transfer data.but i dont really care about it if the quality is not going to be there.so im going to get my money back within the 7day customer satisfaction period.

I was looking at the 3ccd panasonic camcorder.This one is only a few hundred more than what i have paid for my current camera as you can see.>>GOOD GUYS VIDEO CAMERAS<< also i have seen the quality off the dvd camcorders,what i was going to get untill i got hdd,which are pretty good.

Another reason i went his way was because i will be shooting some in car footage and i thought that the dvd will skip while recording.does it??

What way should i go?

Link to comment
https://www.sau.com.au/forums/topic/186594-what-video-camera-to-buy/
Share on other sites
Trust33 Grand Master

Trust33

Posted
  • Author
Posted

Hi peeps.(This thread is posted elsewhere in the photography sect also)

I need help on what video camera to buy.

I just bought a panansonic hdd 30gb job.>>GO HERE FOR VID CAMERA<<

After a little use i decided to have a look at the quality of the film on the computer.It was definently not what i had expected.when you look through the lcd screen you think it will be good but when it comes to full view,to me i have seen better quality tape camcorders,i cant see what all of the rage is about.sure it is convenient to transfer data.but i dont really care about it if the quality is not going to be there.so im going to get my money back within the 7day customer satisfaction period.

I was looking at the 3ccd panasonic camcorder.This one is only a few hundred more than what i have paid for my current camera as you can see.>>GOOD GUYS VIDEO CAMERAS<< also i have seen the quality off the dvd camcorders,what i was going to get untill i got hdd,which are pretty good.

Another reason i went his way was because i will be shooting some in car footage and i thought that the dvd will skip while recording.does it??

What way should i go?

Trust33 Grand Master

Trust33

Posted
  • Author
Posted

im looking through the myrid of cameras atm.its really pissing me orff.here i was thinking that i had bought a good camera when bam.what a kent!

http://panasonic.com.au/products/details.cfm?objectID=3696

only prob is that good guys dont have it catalouged so i dont know for certain if they can get it or not.

thanks for the input so far keep it coming.

Col-GTSX Grand Master

Col-GTSX

Posted
Posted

Tape is still what the pros use...

Every camera over $2000 is tape...

Reason why is it is fail safe, does not suffer from heat, magnetic fields or vibration... Perfect for in car use...

If you want quality footage then id suggest the HV20 (Canon) have a look online at the reviews, it is awesome with true 1920x1080 progressive capture on a CMOS sensor...

You will be spending a solid $1600-1700 tho for this unit, if thats too much then just buy a cheap tape camera $400-500 (like the MD160) as it will be better than 90% of the HDD cameras out on the market at the moment...

Beer Baron Grand Master

Beer Baron

Posted
Posted

if you plan on doing any in car stuff then atm there is only one option. mini DV. both hard disk and DVD cams are susceptible to sharp knocks, and even vibration can kill them at worst and give you bad footage at best. and if you want really good quality then you need a 3CCD camera. so narrow that search to mini dv 3CCD cams and you will be onto a winner. for handycams i've always liked JVC and I have one now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      Lamb roast on Saturday will be different 🥲
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...