Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i would take it but in Perth...if you are willing to post let me know how much to postcode 6009

cheers

Hey mate, i would post it but who will post it and how?

I don't know much about posting fragile stuff, hence why i only get quotes from pack and send. because well they pack for you! But they are a rip and quoted almost 300$ because a box has to be made around it for it to go on a pallet so it isnt damaged.

Make some calls for me?

don't get ur hopes up, shipping to melbourne was $290

yeah that sucks any ideas for different cheap companies or ways to send fragile items this big?

yeh its a rip but like you said no real choice. mmm can you get some dimensions of the wing so i can use that to find out the size of box needed and stuff if thats cool. maybs just pm the details.

cheers

yeh its a rip but like you said no real choice. mmm can you get some dimensions of the wing so i can use that to find out the size of box needed and stuff if thats cool. maybs just pm the details.

cheers

PM Sent.

Last time I sent a wing... slightly smaller wing bout half the height Adelaide - Sydney via Greyhound couriers for approx $60 - made a cardboard box for it from multiple boxes joined together duct taped it up wrapped the wing up in paper and scrunch a heap more paper in to protect it.

http://www.greyhoundfreight.com.au/aboutus.asp

Last time I sent a wing... slightly smaller wing bout half the height Adelaide - Sydney via Greyhound couriers for approx $60 - made a cardboard box for it from multiple boxes joined together duct taped it up wrapped the wing up in paper and scrunch a heap more paper in to protect it.

http://www.greyhoundfreight.com.au/aboutus.asp

Thanks for that....

Ok guys its 143$ to a depot in any main city.

Extra 45$ to go to your door if your close to the city areas i think.

Very good price there! I sold mine for $450 and that was without Nismo caps. These genuine GTR wings are MEGA rare people. Also they aren't fibre glass and prone to cracking like the aftermarket jobs. These are full plastic and very sturdy with full adjustable wing.

Stick to your price steveo because someone will buy it for what you are asking (and it's already at a very good price).

Also, try airroaddirect.com.au for transport. I used them and they are not too expensive.

GL with sale.

Very good price there! I sold mine for $450 and that was without Nismo caps. These genuine GTR wings are MEGA rare people. Also they aren't fibre glass and prone to cracking like the aftermarket jobs. These are full plastic and very sturdy with full adjustable wing.

Stick to your price steveo because someone will buy it for what you are asking (and it's already at a very good price).

Also, try airroaddirect.com.au for transport. I used them and they are not too expensive.

GL with sale.

Thanks Steve.

Yeah firm at 400$ .. Surprised I still have it here!...

Yeah the fibreglass copies are rediculous I bought 1 before I realized it is genuine or nothing for quality. ..

They fit shit, bend and paint just looks pathetic on them. They are flimsy as anything and cannot be pulled apart / adjusted....

mate my offer still stands....400 including delivery....

so then i get 240 bucks ... no

Edited by steveo_r33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
×
×
  • Create New...