Jump to content
SAU Community

Dosing

my_line

By my_line,
in Engines & Forced Induction

 Share

Recommended Posts

eMsta Grand Master

eMsta

Posted
Posted
hey i was woundering if anyone knows how to dose the rb25 so it sounds like the vl flutter anyone knowww???

woundering??? perhaps thou needst to work on his english first - i recommend reading a few plays by my homeboy William "DuB" Shakespeare

and the flutter - we dont know how to do it like the VL's - most of us just do the sounds by using our mouths to make our own flutter sounds.....just try it one day. But if you want people to hear you, you need to get one of them megaphone thingys.......

Link to comment
https://www.sau.com.au/forums/topic/187329-dosing/#findComment-3381398
Share on other sites
LTHLRB Grand Master

LTHLRB

Posted
Posted
you wanna be tought c**ts ova the net y dont u come face to face wif me den will see whos the tought c**t come to auburn progress park

haha look at this f**khead arking up over the net... if you saw HALF of sau vic.. you will shit urself..

man stop posting dumb shit, dont ark up at us and ull b ok

untill then.. keep flexing

Link to comment
https://www.sau.com.au/forums/topic/187329-dosing/#findComment-3381444
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...