Jump to content
SAU Community

Got A Solution For Ppl Sick Of Skylines Being Stolen...


Recommended Posts

I have had 3 skylines .. a 33 series 1 a 33 series 2 and an r34 gtt.

Love the fact that they are 206 kw factory... hate the fac that someone wants to steal them every chance they can.

Insurance is expensive, some ppl dont even have insurance.

But where are you going to get a car with style with the following options;

200kw factory

AWD

Smooth look and feel...all the fruit you need!

4 Cylinder turbo, cheap to run, insure and register....

And stealth enought to not attract the attention of the law and criminals?

http://www.goo-net.com/cgi-bin/goojp/used_...pe=maker_search

Ready to import now.. sub 20k....I am soooooo getting one.

http://www.prestigemotorsport.com.au:80/mo....php?storyid=34

Legnums are deff' the go if you want a turbo wagon 2.5 litre twin turbo V6 (6A-13) and they are cheaper, iron chef has a few from 10,800 to 14,500, that or a stagea.

Edited by D_stirls
still the soccer mums car but....

hmm ive read nothing but stolen r32/33/34's for months, now ive heard knife point car jackings and ram raids for a skyline.

I would rather have a caldina with the same power as a skyline but without all the bullshit any day..

And they look tough.

you know you can get up to a 2007 model one of these.

Yes the Iron Chef has a couple but they are pre 2002.

post-3903-1191200207_thumb.jpg

Edited by cell

you can now pick up a Audi A4 b6 turbo quattro for mid 20 - 30's (avant if you are looking for wagon)

the pre 02 caldina looks poo and i doubt 03 onward will be any cheap

it really makes me wonder why imports?

when i had my S13 or r33 5,6 years ago

there were nothing in the market provide similar options, performance and style for under $60,000

imports were the obvious choice, as a shitty E36 318i costs more than a R33 gts-t

now they are no longer the most money for value

I still own one only because I am passionate about skyline

if I have to make a sensible change I would have a decent look around before I consider an import again

A soccer mums car is a toyota torago, or a an urban SUV/4wd.

Legnums and WRX Wagons and Caldina are not soccer-mum cars, they are hatches and wagons, furthermore, there is no such thing as "soccer" in Australia. its football. Soccer resides in the US.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
×
×
  • Create New...