Jump to content
SAU Community

Recommended Posts

OK GUYS.. $20 to anyone who finds me a decent S13/180sx or S14 to put my RB25neo in..

must be manual.

must be able to register in my name.. asap.. as in RWC and paperwork..

must have clean chassis.

im looking for stuff like this.

180sx CARSALES

of course cheaper the better.. ill also throw in some free parts too if its a good base car...

if i look at it give it the nod and buy it $20 is all urs.. :blink: that and some parts i have lying around here :blink:

THANKS

Link to comment
https://www.sau.com.au/forums/topic/187516-wtb-20-is-urs-if-u/
Share on other sites

If you were just looking for a drifter this would be perfect but alas it can't be registered. I will keep on the lookout. If you need some sideskirts I got a pair here never fitted for a 180sx :rolleyes:

http://ucn.dealernet.com.au/detail.php?ses...p;ucnid=2529908

Also found this for you mark if you can bring one up from Sydney

http://www.nissansilvia.com/forums/index.p...howtopic=259064

Edited by Triptych
If you were just looking for a drifter this would be perfect but alas it can't be registered. I will keep on the lookout. If you need some sideskirts I got a pair here never fitted for a 180sx :)

http://ucn.dealernet.com.au/detail.php?ses...p;ucnid=2529908

Also found this for you mark if you can bring one up from Sydney

http://www.nissansilvia.com/forums/index.p...howtopic=259064

thanks adam.. i knw ironchef from before.. im watching him build up his importing empire.. and i would personally use him or jspec for importing..

how the A/C go.. im glad my 180 has A/C aye. summer is gay here in QLD.

whats your max you want to spend mark?

hiya chris how u doin

to be honest im hopping to spend 5k on a decent bodied car. but will pay more if have to.

thanks so far guys..

lol ^^
I dunno what's so funny about 5k for a car that doesn't necessarily have an engine. I would think an 180 minus engine would go for around that.

its fine... his name is dale.. and that is as bogan as a name can get.. ahhaa..

but this is a serious thread.. dont post unless u have some useful info. or ill get a nazi mod on ya...

Edited by markimak

just curious, why does it need to be manual if your changinfg the motor and box over anyway?

also i have an S13 that requires only a few parts to be rwc(i would fix before sale), and a paintjob. CA18, NA, Automagic. thinkin 3k?

just curious, why does it need to be manual if your changinfg the motor and box over anyway?

also i have an S13 that requires only a few parts to be rwc(i would fix before sale), and a paintjob. CA18, NA, Automagic. thinkin 3k?

hmm interesting mate.

send me pics to my email/msn

[email protected]

u live in WA.. u need the money foo.

anyone else..?

its a spotters fee..

I was laughing at this comment. As I saw humor in it cause i used to live in perth ..

and i just was too lazy to hit the quote button...

I found your bogan comment to be quite amuzing though..

I was laughing at this comment. As I saw humor in it cause i used to live in perth ..

and i just was too lazy to hit the quote button...

I found your bogan comment to be quite amuzing though..

haha glad u didnt take it to heart bro.

yeah thought u wer slinging shit.. sorry..

far out i want that 180sx already...

i plan on matt blacking it cause its gonna get alot of dori damage..

i don't get it? is it a white people thing?

STOP SPAMMING MY THREAD.. :)

and no.. i aint white.. im chocolate ask josh... i would post a pic but im afraid some random WA peodphile will jizz his finest over a carbon copy of my tnaned lines. :P

back on topic.

i have the option of forking around5-6k to kristian at iron chefs and he will source me a suspension diff braced equiped exo drifter from the land of the rising sun.

I currently have my 180 for sale, it is currently an RB20DET, Manual, has JIC coilovers, 5 stud conversion (S14 Fronts, R32 R200 Rear end), HKS Front Pipe, Cat replacement pipe, 3" RSR cat back system.

post-1172-1191546619_thumb.jpg | post-1172-1191546611_thumb.jpg

I am after $8000 without type X taillights & with stock R33 GTS25-t wheels.

I currently have my 180 for sale, it is currently an RB20DET, Manual, has JIC coilovers, 5 stud conversion (S14 Fronts, R32 R200 Rear end), HKS Front Pipe, Cat replacement pipe, 3" RSR cat back system.

post-258-1190076553.jpg | post-258-1190076563.jpg

I am after $8000 without type X taillights & with stock R33 GTS25-t wheels.

pics no work mate.. where abouts are u located.?



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...