Jump to content
SAU Community

Recommended Posts

dean.. con has one on his the TR43 or some shit.. external gate.. for a smallish size turbo it doesnt have anything under 3,500rpm and made 215kw with 14 or so psi... supported with a microcrap and the rest

Well our turbochargers do require a running in peroid of 1000KMs. before that has been done it will appears to be laggish as the Journal bush needs to be worn in and the core needs to be libricated by oil.

Lot of tunners dyno tune the car straight after the turbo's installation and obviously it will not give the best result. The power out put of the car also depends on the tunner.

the turbo has been on for more than 1000ks.. ok its a cheap turbo and bang for your buck.. but for a smallish turbo on a 25det with supporting mods, im unimpressed.. but it does have good torque

We just made 230kws on 14psi with a fully standard engine, Stock cams, Stock AFM, Stock injectors. Please PM me a copy of the dyno read out, I'm really ken to see it. For some reasons I believe the turbo that you dynoed was a TR44 or might be not one of our turbos.

Also just want yous to see a comparison between a 440HP Ball Bearing turbo on a RB25det with a Our TR43 on a CA18det and TR43 on a RB25det

440HPBB RB25det turbo maxed out @ 240KWs with injectors, Max boost 25PSI @ 4798RPM

RB252535.JPG

TR43 CA18det 230KWs MAX (keep in mind this is a 1.8L 4cyc engine). Max bost 25PSI @ 4658 RPM

TR432ndrunKW.JPG

TR43 RB25det 230KWs MAX Factory injectors leaned out @ 14PSI

r33250kws.JPG

Power compare with RB25det TR43 vs RB25det 440HPBB

RPM_______________3000_ 3500_ 4000_4500_5000_5500_6000_6400

TR43 Power(KW)______111__130__155__185__202__210__225__230

440HPBB Power(KW)___60___75__ 100__145__210__220__221__230

And as I repeat the TR43 RB25det fuel leaned out, and dynoed with only 14PSI.

TR28kai 340HP vs 300HPBB turbo

tr28kai15psis14.JPG

  • 2 weeks later...
dean.. con has one on his the TR43 or some shit.. external gate.. for a smallish size turbo it doesnt have anything under 3,500rpm and made 215kw with 14 or so psi... supported with a microcrap and the rest
For some reasons I believe the turbo that you dynoed was a TR44 or might be not one of our turbos.

but isnt the TR44 rated higher than the TR43?

yes. TR44 it rated 50KWs higher, Bigger, also slight laggier. Here's a dyno read of TR44. the 1J made 240kws on 14PSI@2350RPM, and 276KWs on 16PSI@2400RPM with 50Nos.

dyno_001__Large_.jpg

Edited by hypergear

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...