Jump to content
SAU Community

"metalcat" Hi-flow Catalytic Converters

Rob260

By Rob260,
in Group Buys

 Share

Recommended Posts

Rob260 Community Regular

Rob260

Posted
  • Author
Posted

Most left wednesday 21/11 but yours left friday 23/11 as I ran out of tape on the first lot.

All were sent from Sydney 2074 via registered post

Cheers when were they sent today or yesterday and where were they sent from (city) ?
Tomei_33 Rising Star

Tomei_33

Posted
Posted
cheers got mine today, how long is the warranty and how do we claim if we need to ? as there is no invoice

mine came today too :( ^^ +1 how to claim warranty?

Rob260 Community Regular

Rob260

Posted
  • Author
Posted
cheers got mine today, how long is the warranty and how do we claim if we need to ? as there is no invoice

Good to see they are showing up! Fair question re warranty. I didn't send out individual invoices as I only have one invoice to cover the purchase of 17 cats....

Everyone involved has my phone number, get in touch either by phone or forum if you need to make a warranty claim.

Rob260 Community Regular

Rob260

Posted
  • Author
Posted
how about a copy of the invoice emailed to us ?

I can do that but it won't be much use as the invoice is made out to me.

I will ask the supplier for their advice on this one.

Rob260 Community Regular

Rob260

Posted
  • Author
Posted

Info On Warranties

OK guys checked it out and I can issue individual receipts for warranty purposes.

Can you please PM me your full name and an email address if you want a receipt.

Thanks!

Rob260 Community Regular

Rob260

Posted
  • Author
Posted

Cats are all gone guys.

I have emailed receipts to Mark0, Anto, and Tomei_32.

Anyone else who wants a receipt please PM me your full name and email address.

Thanks!

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...