Jump to content
SAU Community

Recommended Posts

  • Replies 241
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

been trying to find some pics for you

but Im over it

look up a drift team in Japan called Murder they have done r32 wt 34 front

33 wt 34 front 32 with 33 rear

there 32 with 34 front looks much better than the bee r car imo and was done back yard style

http://www.geocities.co.jp/MotorCity-Pit/3155/

I got this close but I think its a very big team and this is them from another area

just scanned the art

post-15018-1193012348_thumb.jpg

there's also a green R32 sedan with an R34 GTR frontend done by a drift crew... the build article is in Skyline mag (yes there's a dedicated magazine for skylines, and another for GTRs)... i'll scan it up.

r32's with 34 conversions would be cool in canada where no one has an R34 (well legally anyways) but you'll find that outside of there it'll mostly be on drift cars and other cars which are generally trashed about and have had a frontal crunch.

here is a Bee-r B324R here in Canada.

In my opinion the car looks terrible.

I cannot get over how bad the front bumper looks, and the gas door isnt flush... then using the r32 taillights just kills the impression.

1183_SkylineR34102_004tmp.JPG

1182_SkylineR34102_003tmp.JPG

1187_SkylineR34102_010tmp.JPG

i am extremely happy that i didnt settle for the bee-r look, and went my own direction.

regarding the pink gtr in the above post by 1400r

i like how the front end looks completely stock of an gtr look, but HATE the Uras style sideskirts and rear bumper.

I hope my car will be one of a kind and known worldwide;)

  • 4 weeks later...
  • 2 weeks later...
Its Getting there :)

Thought you said the rear was getting done a while ago/ already done. and you were getting it moulded.

no i said the front fenders were getting a mold of it so i can sell the conversion fenders, and WHEN the rear gets complete, i will make a mold of that aswell before it gets painted so i can manufacture the full kit once complete.

  • 4 weeks later...
  • 1 month later...
  • 4 weeks later...
Anymore progress with this project or has it come to a stop.

Well im paying for this project to be converted.. its not in my hands...

I went there today to take some UPDATE photos for the world:P

When I said rust free GTR... i never thought it ment DUST free too!! wow.. she is a clean one.

IMG_1236.jpg

IMG_1237.jpg

IMG_1238.jpg

IMG_1240.jpg

IMG_1241.jpg

IMG_1242.jpg

IMG_1243.jpg

IMG_1246.jpg

IMG_1245.jpg

oviously the r34 sheet metal needs some more detailed trimming...

IMG_1244.jpg

rear panel behind bumper

IMG_1247.jpg

Old quarter panels for sale... 200CDN/side lots of life left

IMG_1248.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...