Jump to content
SAU Community

Recommended Posts

Hey All,

I need cash, so the missus has convinced me to sell the baby. It's only fair i guess seeming as how it sapped all the money in the first place. Goes like this.

1996 R33 Series 2 Gts-t

-5 speed manual

-112 xxx kms

-Resprayed by Candyman Spray Painting in Sydney in Jet Black

-Car gets regularly washed, polished and waxed using only top quality products

Brand New Engine Rebuild.

Consists of the following

CP Forged Pistons, Eagle Rods, Tomei Metal Head Gasket, All New Nissan Gaskets, Extensive Head Work, Head stud kit, N1 Oil Pump and Collar to suit, N1 Water Pump & Nismo Thermostat, HKS Step 1 Cams, HKS Cam Wheel, Z32 AFM, HKS GTRS Turbo, 555cc Injectors, Bosch Fuel Pump, Split Fire Coils. There is alot more that has gone into it, but this should give you an idea on the kind of quality parts that have been used. For exact specs on head work or any thing else please call me and i can put you in touch with the man who built it. Car has only travelled 1500k's since the build and hasnt even had a run down the strip yet. The above work/ parts cost me 20K,( with receipts) and has an engineers cert to boot.

271 RWKW @ 18Psi (very safe tune)

Others Mods etc:

•Genuine Gtr bodykit (obviously isnt a perfect fit with the gtst gaurds)

•Carbon Fibre reverse scoop bonnet sprayed with a clear coat (with bonnet pins)

•17 inch Volk EMU Racing rims resprayed in Black fitted with near new Hankook K104 255x40 (rear) Yokohama 235x45 (front)

•Tein height adjustable coilover suspension, hard but not uncomfortable

-Cusco Front Strut Brace

•DBA4000 slotted rotors front and rear

•DS2500 front brake pads, RACEBRAKES rear brake pads

•Cusco castor rods set to 8 degrees castor

•GFB Stealth Fx blow off valve (fully adjustable, can be fully closed)

•3inch split dump/front pipe into 3inch CATCO hi flow cat continues into 4inch through to 7inch cannon with 5inch fluted tip, also have a legal bolt on end muffler.

•Power FC & Hand Controller

•Apexi AVCR Boost Controller

•Apexi Turbo Timer

•Apexi boost gauge

•Apexi pod filter

•Twin thermo fan set-up with 1x12inch & 1x14inch fans

*New Battery

•Genuine C’s shortshift kit

•Aftermarket steering wheel, pedals and Gear Knob

*Nismo Clear Indicators

*Aluminium wheel nuts

•Stock diff re-shimmined

•Hybrid Tube & Fin 700x300x75 FMIC fitted

•Excedy 5 Puk Ceramic clutch with RPM brass button pressure plate

*New stereo inc, Alpine MP3/ Ipod Control Head Unit, Alpine V12 amp running 6 inch Kenwood splits in the front and a Soundstream SPL 12" sub.

There is more as well, but i think you get the idea by now, this car has everything you could ask for and will cost you

ALOT less to buy than what it cost me to buy and build.

Custom Plates SLO33R included in sale

$24,990 or near offer

call me on 0409 910 960 for any other questions you have.

post-3771-1191555778_thumb.jpgpost-3771-1191555756_thumb.jpg

attachment=122597:05_10_07_017_10_1.jpg]post-3771-1191555835_thumb.jpgpost-3771-1191555903_thumb.jpg

post-3771-1191555816_thumb.jpg

post-3771-1191555856_thumb.jpg

post-3771-1191555924_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/188053-96-r33-gts-t/
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...