Jump to content
SAU Community

Recommended Posts

post-41982-1191559079_thumb.jpgpost-41982-1191558603_thumb.jpgIM in the process of fixing/ replacing the driver side window motor on my 32. The window will go down most times no worries but doesnt like to go back up. ive got all the door trim off trying to fix the problem. Not sure what the problem/s is tho.

not sure which part needs replacing. The passenger side works fine of both sides driver and passenger but just the drivers side won't. Can ne one help with this issue?

Also are the 33 window motor/ parts the same? Cheers

Above is a pic of what i thought was the cause of the problem am i in the right place?

Link to comment
https://www.sau.com.au/forums/topic/188063-electric-window-motor/
Share on other sites

The motor is the round metal thing right at bottom of the 2nd picture.

What you have there is I think the relay box.

Having either one not work properly can cause the issue you are facing.

Pretty sure the R33 one is not the same.

nuh thats part of the alarm. Discovered that the motor is in behind the door bout middle. Neone know the process of taking it out? Like does the whole lot gotta come out eg. window etc? Whats a motor worth ne one know?

i had this problem a couple weeks ago.. my drivers window didn't like to go up. it would just make a 'tick' sound. the only way to get it to go up was to tap the door trim around where the relay box is mounted. i just replaced the relay and she's working wonders now :)

Couple more questions regarding same thing;

1. Does anyone have a drivers window motor in good condition for sale?

2. Does anyone have the switch panel for the same side?

3.Are the 33's the same?

Really over the fact that it chooses when it wants to work and got one price from a wrecker so far which was hidious! :)

I had the same problem - open up the relay box and check the solder joints on the solenoids (chunky looking things wrapped in copper wire)

On mine, the solder joints on the circuit board were cracked - so small you could almost not see them. I re-soldered and problem was fixed.

search the forum for this repair.

The fact that you said it works when it wants to tells me it is the realy box. good luck

Couple more questions regarding same thing;

1. Does anyone have a drivers window motor in good condition for sale?

2. Does anyone have the switch panel for the same side?

3.Are the 33's the same?

Really over the fact that it chooses when it wants to work and got one price from a wrecker so far which was hidious! :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...