Jump to content
SAU Community

Sau Vs Wrx Nulon Drag Day @ Heathcote, Rd 2 - Wrap Up And Results

Downforce

By Downforce,
in Victoria

 Share

Recommended Posts

Creatd Motorsports Explorer

Creatd Motorsports

Posted
Posted

We had a great day, Kevs GTR ended up running a 10.53 @ 139.75, the R33 4 door isnt a bad car either, it ended up going 11.5 @ 133.68 on M/T street radials, both cars suffered major traction issues. We had fun wich is the main thing!!

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Z1LLA Proficient

Z1LLA

Posted
Posted
Hey Ben. Just wondering how much power the GTR is pumping out at the wheels?

Cheers

Pete

Hey Pete

Mine makes around 250rwkw on 1bar, is your kw figure at all four wheels or at the rears?

Mines previously gone 12.1 at 115mph, however on the weekend the car struggled to do a low 12 and the mph was way off what it should be (even with the street tyres back on it) so I am putting it back on the dyno later in the week to try and see if there is a problem somewhere.

What mods do you have planned for it next?

CRZY32 Rising Star

CRZY32

Posted
Posted
Hey Pete

Mine makes around 250rwkw on 1bar, is your kw figure at all four wheels or at the rears?

Mines previously gone 12.1 at 115mph, however on the weekend the car struggled to do a low 12 and the mph was way off what it should be (even with the street tyres back on it) so I am putting it back on the dyno later in the week to try and see if there is a problem somewhere.

What mods do you have planned for it next?

Mine has 234kw at all four wheels. Or 276rwkw on a different dyno.

Current mods: 2x Garrett 2860, N1 oil & water pumps, forged pistons & rods, Nismo 600cc, PFC, etc.

Next mods: Apexi boost module for PFC (boost 28-30psi), Z32's, tomei poncams, semi slicks.

Im building the car for circuit, but it would be great to get into the 10's on the strip one day!

CRZY32 Rising Star

CRZY32

Posted
Posted
Hey Pete

Mine makes around 250rwkw on 1bar, is your kw figure at all four wheels or at the rears?

Mines previously gone 12.1 at 115mph, however on the weekend the car struggled to do a low 12 and the mph was way off what it should be (even with the street tyres back on it) so I am putting it back on the dyno later in the week to try and see if there is a problem somewhere.

What mods do you have planned for it next?

Ben what tyres did u get? I need to buy rims & tyres. Im trying to decide between GTR33 17x9 rims or cheaper GTR32 16x8 rims..

Standard brakes. Wont upgrade brakes for another 1-2 yrs..

Any advice on rim/tyre size?

Cheers

Pete

justntime Contributor

justntime

Posted
Posted
Thanks Justin, I wouldn't have improved my time without your tips/advice on the day! Was good fun. Shame about Harry's car, time to upgrade those cooling mods! Tuff gate too :thumbsup: Hope to see him on the track again soon. Pete's R32 was very nice, looks hot.. and quick as well! Looking forward to seeing your GTR finished :)
Hey Buddy, did you work out what that vibration was from front right?
Z1LLA Proficient

Z1LLA

Posted
Posted
Ben what tyres did u get? I need to buy rims & tyres. Im trying to decide between GTR33 17x9 rims or cheaper GTR32 16x8 rims..

Standard brakes. Wont upgrade brakes for another 1-2 yrs..

Any advice on rim/tyre size?

Cheers

Pete

I sent you a PM so it doesn't get too off topic here

Z1LLA Proficient

Z1LLA

Posted
Posted

I noticed at the monthly meeting there were some pics shown from the drag day, to whoever took them is it possible to get some of the ones of my car emailed to me? Or are they hosted somewhere?

PM if necessary, thanks.

Z1LLA Proficient

Z1LLA

Posted
Posted

Thanks for that Bec, I appreciate it if it's not too much trouble to send the pics of my cars through.

My address is contact @ mazdarotary.net

Thanks heaps

Z1LLA Proficient

Z1LLA

Posted
Posted
140mph?! jeesus

The timeboards read a little bit 'happy' sometimes, that run was an example of that, as I was in the other lane and the cars were pretty even across the line (I did something like 110mph).

I had to double check it as well when I read the timeslip haha

Jetdat Veteran

Jetdat

Posted
Posted
Ben - Evan (Startrippa) took all the pics at the drag day.

Ive got a CD with high res versions on it - will try to remember to bring to work 2moz and email you.

will they be posted anywhere on the forums?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...