Jump to content
SAU Community

Recommended Posts

if tangles happens to wander through here,

been reading through the 'rise and rise of kevin rudd' thread in the wasteland to kill time, and i like the way you think mate. :)

Bosch 023 is the next step up from 040 and can handle roughly 200hp more (~800hp) , and it still fits in-tank ?

That true ?

Is it worth getting this just to be safe (unsure how hard to push the engine at this stage...) ? I saw 1 on ebay for ~$195 delivered. (Says its genuine Bosch). Steer clear of ebay 1s and go get it from a shop ? Anyone using this pump ?

Thanks

Edited by KISIN

Does anyone know who would be best to fix up the trim on my Momo Wheel? it is splitting at the seam, but the condition of the leather is still good, so looking for someone (motor trimmer perhaps?) to essentially glue it back together with the correct adhesives.

Cheers

i have what i thought was a 32 gtr wheel, but appears to be a 33 s1 wheel

had it since january....horn didnt work cos of a different setup to the 31

has a slight worn patch at about the 7 o clock position

if it works for ya steve ya can have it

http://www.drambuieresearch.com/

Hmm bogans and drambuie do they mix lol :cheers:

ROFL i heard you like it but...

can anyone answer this

ORC TSUINPURETOKURATCHISETTO RB26RB20BNR32BCNR33

will that clutch suit a GTS4 push type ??? :w00t:

this is what i want to get

also does anyone know how much meat is " Disk remaining two are 4.07 mm so still usable. "

chibaken_chibasi-img600x450-1196684723p1000889.jpg

chibaken_chibasi-img600x450-1196684735p1000890.jpg

i had 3hrs sleep today and had to go to observation day thingo with

this place i had an interview with on Monday.

it went quick so it was good ;)

oh my brother bought another Celica :rofl: , it's manual so

i'll be learning manual in that when they get it registered

(hopefully next week)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...