Jump to content
SAU Community

Recommended Posts

if tangles happens to wander through here,

been reading through the 'rise and rise of kevin rudd' thread in the wasteland to kill time, and i like the way you think mate. :)

Bosch 023 is the next step up from 040 and can handle roughly 200hp more (~800hp) , and it still fits in-tank ?

That true ?

Is it worth getting this just to be safe (unsure how hard to push the engine at this stage...) ? I saw 1 on ebay for ~$195 delivered. (Says its genuine Bosch). Steer clear of ebay 1s and go get it from a shop ? Anyone using this pump ?

Thanks

Edited by KISIN

Does anyone know who would be best to fix up the trim on my Momo Wheel? it is splitting at the seam, but the condition of the leather is still good, so looking for someone (motor trimmer perhaps?) to essentially glue it back together with the correct adhesives.

Cheers

i have what i thought was a 32 gtr wheel, but appears to be a 33 s1 wheel

had it since january....horn didnt work cos of a different setup to the 31

has a slight worn patch at about the 7 o clock position

if it works for ya steve ya can have it

http://www.drambuieresearch.com/

Hmm bogans and drambuie do they mix lol :cheers:

ROFL i heard you like it but...

can anyone answer this

ORC TSUINPURETOKURATCHISETTO RB26RB20BNR32BCNR33

will that clutch suit a GTS4 push type ??? :w00t:

this is what i want to get

also does anyone know how much meat is " Disk remaining two are 4.07 mm so still usable. "

chibaken_chibasi-img600x450-1196684723p1000889.jpg

chibaken_chibasi-img600x450-1196684735p1000890.jpg

i had 3hrs sleep today and had to go to observation day thingo with

this place i had an interview with on Monday.

it went quick so it was good ;)

oh my brother bought another Celica :rofl: , it's manual so

i'll be learning manual in that when they get it registered

(hopefully next week)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...