Jump to content
SAU Community

Recommended Posts

just driving normal seemed to have pulled a little from fire wall or the bracket twisted maybe cracked wont know fully untill i get to look at it 2morrow has happend to a mate of mine just unlucky i spose not sure if i can weld it or if i have to get another one :banana:

Cronic, its not the actual pedal but rather the pedal box; the box that holds the pedal.

They have crappy little spot welds which pop eventually. If you don't let it get too bad the box is salvageable as it doesn't completely rip apart.

The fix is to simply weld the box up nicely.

kisin this is a couple of pics of the car i was thinking of

come on steve we all know that the signs on the window have no correlation with the actual car :) after all there is the picture somewhere around with the V8 on the s15

Cronic, its not the actual pedal but rather the pedal box; the box that holds the pedal.

They have crappy little spot welds which pop eventually. If you don't let it get too bad the box is salvageable as it doesn't completely rip apart.

The fix is to simply weld the box up nicely.

I bought a reienforced clutch pedal bracket from JDM CONCEPT for $129.00 delivered after looking at my stock bracket and seeing that it was bent and very weak looking

I bought a reienforced clutch pedal bracket from JDM CONCEPT for $129.00 delivered after looking at my stock bracket and seeing that it was bent and very weak looking

Most likely similiar to the Nismo item. Its around the same $$

http://www.nengun.com/nismo/clutch-pedal-bracket

come on steve we all know that the signs on the window have no correlation with the actual car :) after all there is the picture somewhere around with the V8 on the s15

lol nick sifnt the V8 wasn't an Autech option

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have you flushed the initial fluid yet? It should look like a rainbow unicorn shat glitter into it. 2nd or 3rd fluid change is when you party.
    • all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
×
×
  • Create New...