Jump to content
SAU Community

Recommended Posts

nice as cruizin, youd be cheerin.

I was so cheering all day been looking for a xf ute but come across this on ebay and the owner was champ he bought a new battery for it before i picked it up cost him 120 and he dident charge me and she drives like a new car plus i know the 4.1efi engines like the back of my hand

Yep. Skids. Big ones. And lots of em. And continually be thrashed like a $2 hanson road special.

And when she breaks, RB25DE goes in.

be nice there not that cheap and nasty they have standards lol cant wait to see some of them "skids"

And that falcon is clean as!

25 owns 20, simple as that....:(

driven many different combinations with both motors.

25 has more pro than con in comparison

hey, its no redtop ryan hahahahaha

yes

silvertop owns NICS redtop anyday

i rememeber my massive 79kw on 5psi from that motor

56t gt2871r

10psi at 2400rpm

210rwkw on 8psi with 10.1afr's

Hey Ryan, with 10.1 afr's you should tie a bucket to your zorst and recycle the fuel thats pouring out.

210rwkw could go up another 20 or 30 if you pulled some fuel out. :domokun:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...