Jump to content
SAU Community

Recommended Posts

nice as cruizin, youd be cheerin.

I was so cheering all day been looking for a xf ute but come across this on ebay and the owner was champ he bought a new battery for it before i picked it up cost him 120 and he dident charge me and she drives like a new car plus i know the 4.1efi engines like the back of my hand

Yep. Skids. Big ones. And lots of em. And continually be thrashed like a $2 hanson road special.

And when she breaks, RB25DE goes in.

be nice there not that cheap and nasty they have standards lol cant wait to see some of them "skids"

And that falcon is clean as!

25 owns 20, simple as that....:(

driven many different combinations with both motors.

25 has more pro than con in comparison

hey, its no redtop ryan hahahahaha

yes

silvertop owns NICS redtop anyday

i rememeber my massive 79kw on 5psi from that motor

56t gt2871r

10psi at 2400rpm

210rwkw on 8psi with 10.1afr's

Hey Ryan, with 10.1 afr's you should tie a bucket to your zorst and recycle the fuel thats pouring out.

210rwkw could go up another 20 or 30 if you pulled some fuel out. :domokun:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...