Jump to content
SAU Community

Recommended Posts

are those pictures before or after you changed it back to standard?

before! it was like that when i brought it! it is now standard looking, std rear bar, s2 spoiler, type m skirts and a r33 gtr front bar! couldn't fit the fmic in the standard bar so i got a gtr copy!

Edited by nos man

thanks luke, you can vote more than once to if your feeling generous ;)

Thanks heaps to people that gave chucked a vote up.

Link on this post too just so this page has it also :glare:

http://realcars.zooweekly.com.au/ViewProfi...x?profileID=469

hehe if i win ill buy everyone a drink :D

Was reading up on WRC.com, and came accross this little extract:

FIA rules say that WRC cars must be based on a standard road car bodyshell. For WRC use it is stripped to the bare metal and the spot-welds that hold it together are replaced by seam welding. All unnecessary brackets and mounting plates are removed to save weight, and a tubular steel roll-cage is welded in. After around 700 hours of work it emerges vastly stronger and stiffer than before. Most WRC cars could support the weight of ten road cars. The FIA requires all WRC engines to have a 34mm restrictor in the air intake, which holds down power output to around 300bhp. The cylinder block and head(s) must be based on those in the standard road car, but the crankshaft, con-rods, pistons, cylinder linings, valves and camshafts can be modified. Typical turbo boost is 4-5 bar - compared with up to 1 bar for an average road car - while anti-lag systems mean the turbocharger delivers maximum boost from tick-over. The result is massive torque - up to around 700Nm - about the same as a Ferrari Enzo.

All I can say is holy poop! 5bar = 70psi!!! Love to see an RB25 hold that LOL

^yeah, thats true. Amazing that the intake restrictor (34mm) restricts them right down to 300HP - would love to see what they could get without the restrictor in place. With those sort of pressures would surely have to be 600HP+?

BTW I just hooked up my new Samsung 22" widescreen SyncMaster 2243 monitor for the PC :D Time to watch some movies :O

I have 22" LCD screens at work and hate this small 17" at home ... so I went out and bought an LCD better than the one I have in my office. :D

:D

post-27156-1207018142_thumb.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...