Jump to content
SAU Community

Recommended Posts

Hey does anyone know an autoshop that opens on Saturdays, and i can get my rear brake pads changed?

ive rang like 20 places and no one opens on Saturdays...

my good mate michael or peter will definetly help you out on saturday before 12:30 at Aussie dyno tune (corner of south rd and port rd intersection next to car wash), ring them tomorrow to let them know man, guarenteed cheapest in town. quick as too.

mental note do not road rage with matty31 he could potentially set you blind and every pedestrian within a 2km range.

went for a drive last nite

alternator whines when they're on LOL (a bit too much load methinks) and they are good for a line patrol at night. Can aim at the top of an 11M stobie pole no problems

Going to marion tonite to find something to space them up with on the bracket (as the front of the bar stops me aiming them any lower)

I heard on the radio the other day... Apparently we are turning in to a bunch of metrosexual pansies as a high percentage of males know very little to nothing about their cars nor do they perform any work on them.

There was a few other things.. Owning a pink shirt was one of them.

So Aussy males are apparently becoming in touch with their feminine side. :S

My self I'm quite the opposite; old school line of thought. :D

So buy some cheap super cheap knuckle busting tools and do it yourself. :O

Ha, Ha, lol...what if you wear pink shirts and build fat ass choppers??

the forum looks all stuffed up to me...

any1 else getting this problem...same with ns.com. how do i fix it ???

Top right hand corner where it says "options" go in there and make sure "display mode" is set to "Standard"

i run the 9puk extreme HD ceramic 850kg pressure plate

wats a street driven clutch for around 250kws???

locally would be good.. and good price would be better!

cheers

have you tried pressing CTRL-F5

the forum looks all stuffed up to me...

any1 else getting this problem...same with ns.com. how do i fix it ???

wow doesnt time fly when your having fun :P

happy bday to my car today :D owned it for 1yr today :)
wats a street driven clutch for around 250kws???

locally would be good.. and good price would be better!

cheers

i use a extreme extra heavy duty single plate, i think it is a 6 puk but not 100% sure, the pressure plate is just ova 1000kg, cost about $600, got it through Tilbrooks, if ya coming on the cruz saturday night i might let you test it out.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...