Jump to content
SAU Community

Recommended Posts

yay.....................the ute rattles again

this time i wasnt doing anything dumb...............................just driving home minding my own business

really am ever so slightly f**ked off about it................its what some would call "bad timing"

Edited by Matty 31

D_Stirls, Nice find..

When I removed my bushes I did the same except used a drill bit popped the middle then used a hack saw to cut the outer shell. Once the shell was cut it popped out without drama.

I then used a piece of exhaust pipe and smacked the new Noltec bush in.

they sell r33 for like 280 each rotor there!

My brother (GROWLY Custom Machining) will do basic slotting (RDA/DBA straight slot design or curved slots) for around the $40 mark so remember this when you by new rotors, it might be cheaper to get plain rotors and get them slotted. He will do them cheaper again if you get a whole set done.

This is my rotors he did, something like this would be $55.

Image359.jpg

Edited by D_Stirls

hmmmm, thats very handy! id say standard rotors would be cheaper than slotted right?

and 55 per corner? = 200 atleast for slotting.......i might work out dearer??? sorry, just thinking out loud here....

does this help :)

post-13315-1214313016_thumb.jpg

oohhh, where can i get a 33 gtr placard in case i get pulled over for my 19s?

as nos man pointed out R33 are dearer that price of $129 ea is for falcadoore

i see supercheap sells DBA slotted rotors, 129 ea.....would they stock them for a 33?

Matt the owner of Growly Custom Machining told me take all the prices too him and he will make sure it doesnt work out dearer how much farer can that be

Matt is a top bloke and is here for the community whislt earning a honest living doing what he loves

BTW Matt re drilled my GTSt rotors to suit 4 stud while i waited for my conversion :)

If you look at that picture those rotor have been drilled to 4 stud as they are fitted on my 180sx.

The $55 was for my design which involves more machine time that the standard sots and hence are more expensive. like i said before the basic slots are around $40 and cheaper when you do all 4.

He'll slot any rotor provided they are thicker than the minimum thickness.

Edited by D_Stirls
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...