Jump to content
SAU Community

Recommended Posts

Something like this Steve?

edit. ughhh can never get ebay links to work. Found a better one, but as i have factory Xenon headlights, will i need a HID kit? Theres on on ebay for $73.99 posted.

Edited by Damo_R34
thats wierd isn't it....I wonder if that's more the exception than the rule....what happens to the bits when they do fly apart then?

One theory could be that due to the cam ovtserlap the bits make their way through the inlet then straight out of the exh valve before the bi get combusted.....poor cats if that is the case!

My thoughts are its most likely as you say cam specs but I can't see the ceramic going back in to the inlet UNTIL you jump off the throttle. Could also be something to do with the smaller turbo; turbo being closer to the ports with a direct path unlike the log manifolds.

i work tomorrow and monday!! so no chance of making it down there!! or anywere that means! so after hours job! lol..

can i borrow someones then get one tuesday from u steal it then give it back?? hehe

How much it set you back champ?

$300 for resonator, $200 for fitting and the junBL's were from the forum here for $450 for the pair (but they originally came from exh tech anyhow)...

Probably gonna get custom dumps, a barrel muffler and a high flow cat from them once I get my new turbos...

-D

Well i currently have a friend painting my skirts and rear, but he will be a bit busy before now and autosalon with my stuff, so ill look for someone to paint and fit it for me before August 8th hopefully :banana:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...