Jump to content
SAU Community

Recommended Posts

I had a slight issue when I was running a 400fsb where it was rock solid in prime and memtest yet BF2 would still randomly drop to the desktop. Dropped it back to 333 with the same overclok and its now fine.

Thats a memory timing issue. Either the ram isnt rated at 400mhz / pc3200 or the latency timings are out of whack... I only ever had that with cheap ram. When I switched to corsair xtra low latency ddr I stopped having problems (and got a better whetstone too)

-D

what is it? besides a brand of jam ? ^

Theres your standard, baseline ram which is good for what its rated for.... but barely...

Such ram is made by Hynix, Legend.... then you have the really good stuff for overclockers and system tweakers, usually its made by Corsair or OCZ or Team Extreme.... not only can they deal with faster FSB's (for when you're overclocking the FSB) but they can also support more aggressive latency timings (which makes the system more responsive as opposed to FSB which is just how >fast< the memory transfers...)...

Will definately be buying corsair next time but that wont be for another year.... need new turbos first >:(

-D

My supervisor is off sick, so me and my mate are making her a computer out of cardboard. i even photocopied the keyboard and stuck it on some cardboard :( that will teach her for being sick.

If she has a cubicle, tape the entrance off and tip a few hundred litres of packing beans into it. Laughs ahoy

-D

I have seen a pic of that, unfortunately we don't have a cube farm here. I filled a guys draw with packing beans once, he wasn't overly happy.

the other thing u could do is use a screwdriver/ruler to pop the keys off her keyboard... then put them back on in random locations... it'll confuse the hell out of her muahahaha

-D

the other thing u could do is use a screwdriver/ruler to pop the keys off her keyboard... then put them back on in random locations... it'll confuse the hell out of her muahahaha

-D

Ha did that to my mate on friday, and he still hasn't noticed.... dick

the other thing u could do is use a screwdriver/ruler to pop the keys off her keyboard... then put them back on in random locations... it'll confuse the hell out of her muahahaha

-D

I had a mate try that one on me. Joke backfired because I can touch type and not look at the keyboard :D

He got immensely irritated that I wasn't taking the bait. :) It all started because I gave him shit about how he's an IT 'expert' yet he types with 2 fingers at about 15wpm.

I had a mate try that one on me. Joke backfired because I can touch type and not look at the keyboard :D

He got immensely irritated that I wasn't taking the bait. :) It all started because I gave him shit about how he's an IT 'expert' yet he types with 2 fingers at about 15wpm.

Haha. Whenever anyone says they're an expert at anything IT related, you know theyre talking out their cornhole :)

Other thing is to replace the kb with one of those touchtype keyboards without the letters printed on them. Really screws with novices...

http://www.thinkgeek.com/computing/input/8396/ heh....

-D

hahaha sorry bud already have HID maybe you can take my lead and try a group buy yourself

steve wanna do a group buy for headlights? i wouldnt mind new ones as mine arent too bright!!

Mark - how'd you go with your computer

Thats a memory timing issue. Either the ram isnt rated at 400mhz / pc3200 or the latency timings are out of whack... I only ever had that with cheap ram. When I switched to corsair xtra low latency ddr I stopped having problems (and got a better whetstone too)

-D

The board is an EP35-DS3 so DDR2. :D

The ram is fine its DDR800 and not overclocked being at 800.

The chip simply has hit its fsb wall at 400; it doesn't like 400mhz; 380fsb is fine. I haven't bothered to find where exactly the fsb wall is.

In the past I've always gone corsair, OCZ etc.. Had a few bad DOA corsair sticks (back in the ddr2700 and 3200 days) touch wood no issues with OCZ.

These days there's no need to go for the top line stuff unless your really after the last poofteenth; 1066 gear can be picked up cheap these days. Run 1:1 - thats a 533fsb of which will easily net 4ghz and beyond; providing your chip doesn't hit its fsb wall before prior. Intels are fairly forgiving to higher latency (unlike AMD) due to their mem controller design.

Save a shit load and buy decent A-data or kingston; you really can't go wrong. Stress it with memtest looping test 5 and then 8; if its bad it will show so return it for another 2.

hahaha sorry bud already have HID maybe you can take my lead and try a group buy yourself

Mark - how'd you go with your computer

What K are yours Steve? I was going to go 8k but i dont know, i like the 10k. Its a toss up between those 2. Also where did you get them from, ive been looking on ebay, but dont want to comit to the buy haha.

get 6k man 8 and 10 will be too blue and you'll find your self getting pulled over

and also a common miss conception is the higher the k the brighter they are bit its quite the opposite

i got mine from a group buy in R31skylineclub

get 6k man 8 and 10 will be too blue and you'll find your self getting pulled over

and also a common miss conception is the higher the k the brighter they are bit its quite the opposite

i got mine from a group buy in R31skylineclub

Alright. 6k it is. Im a member over on the R31skylineclub forums, so might go have a look. Thanks mate. Probly would have gone the 8, but yeh, probly best if i dont get pulled over.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...