Jump to content
SAU Community

Recommended Posts

ouch.....lucky you didnt knock yourself out mate

With the number of times I have had these diffs out of cars my biggest fear was that it would drop it on my head and now it has happened. Luckily I wasn't using the pit so it only fell 30cm before hitting me not 1m like if I was in the pit. This is the first time that I had someone "lending a hand" and i think they pulled it off the sway bar which is why it dropped. so I think for now on I'll stick with doing it by my self

Edited by D_Stirls
dont need to replace the plugs unless the old ones are shagged. if still in good nick just clean the magnet and plug.

thanks to damo and chad about the jobi congrats. means alot! im scared as hell, start tomorrow working for a company called maison design as an all rounder.... called up friday, interview saturday, trial monday!! haha awesome!

http://maisondesign.com.au/

lol @ dohmar's lack of dash! looks hectic!

chad! we want pics!! ;) havin fun getting intimate with your cluster?

here ya go buddy, took just under 30 minutes :(

dashlights.jpg

^^^ if they are on pillar and restricting vision they are a no go. but as far as i know guages are allowed anywhere aslong as they dont restrict any vision out the car.. hence why chad would have passed through regency

hmm Nissan got smart when they made my car :(

so i have a "fibre creations" nismo front bar that has no holes. I can get it paitned cheap, but i need to get it fitted, holes drilled and work done, then it gets painted and then i can fit it after painting. Do you think places like all type crash would bother with a small job like that? Any recommendations?

hmm Nissan got smart when they made my car :(

so i have a "fibre creations" nismo front bar that has no holes. I can get it paitned cheap, but i need to get it fitted, holes drilled and work done, then it gets painted and then i can fit it after painting. Do you think places like all type crash would bother with a small job like that? Any recommendations?

im pretty sure they would, money is money, probably do a cashy for ya

UNfkingBELIEVEABLE

SO I killed the cressida right, drove over 10kays with the needle on H, had the rattle of death going the whole time and also managed to cook the oil in it.

I topped up the oil/coolant today, turned the key and after a few lazy chugs, she fires up and settles to a reasonably good idle, given the previous abuse. I also drove it a further few kays with not a single problem (it hesitated slightly when moving off from a standstill on a steep hill).

I just can't fathom how it could take so much abuse and still run and drive like nothing happened. Fking 7M is damn near unbrakeable :(

When I first bought the R32 going on 8years ago the coolant temp sensor was dicky.. First summer engine temp went from 1/4 to half. I was wondering why the car would get really sluggy and on occasions stall and then not start until it would cool. Water would constantly blow out of the overflow.

Summer past; replaced the coolant temp sensor to realise it was constantly driving around on H. Maxed out the gauge. :S

It went on to clock another 100,000km's. ;)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...