Jump to content
SAU Community

Recommended Posts

hey Joel.....did you have to retard the exh gear to compensate and bring the power curve back to the left?

I'm abit confused, cause even though 9mm is not huge lift, when I went to school, bigger overlaps always caused a shift in rpm in a northerly direction.......maybe it's more to do with your tune than the cams cause I always thought that better response is not generally a side effect of bigger overlaps :blink:

:laughing-smiley-014: Back and to the left........

ahh ok.......sounds like an Ivan Tighe grind.

I though you may have been running a Poncam, HKS or similar cause they all run bigger overlaps than stockies

Tighe regrind it was.

I stumbled upon a list of HKS, Jun and LCA's but be buggered if I can find it.

I do remember the Rb20det's definitely had the same 110 and 115 LCA's when running in the 264 duration range.

Rb25's.. 115/115.

Tighe regrind it was.

I stumbled upon a list of HKS, Jun and LCA's but be buggered if I can find it.

I do remember the Rb20det's definitely had the same 110 and 115 LCA's when running in the 264 duration range.

Rb25's.. 115/115.

So would u recommend me get cams if I'm getting camgears, turbos, and injectors (and their support mods, fuel pump, water pump, afm, gaskets)... and if so, what type? I know nada about engine physics

-D

Cams always help make the power easier..

Don't overcam it. I was a little nervous 265's were a little too big but Shaun has had good results with that type of duration on fairly stock rb30det's previously so I went with his advice.

yeah we used to deal with Tighe Eng many years ago when I was still at Adelaide Eng, so I've considered going with one of his grinds as opposed to alot of the Jap stuff out there.

Good thing about them is that they don't just grind a second hand cam then end up with undersize lobes that have gone through the hardening process but instead they either start with a new billett or build up the lobes first. I find that alot of the jap grinds aren't really considering the average Joe that needs to drive to work through peak hour.

Sometimes I wish I still had access to our cam grinder and all the various masters that we had cupboards full of.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...