Jump to content
SAU Community

Recommended Posts

damo, get a hand controller, its definetly worth it, alot of people have had their car tuned then gone to drive it on the road only to realise they have a higher than safe knock level because the tuner didn't take into account the dyno is only a tuning tool and not the same as driving on the road. Plus you can keep an eye on boost levels aswell and chicks dig it.

i accidentally posted this in the cars spotted thread lol, my bad....

im doing all my oil swaps this week, anyone with a 32 gtr got any advice???

so far i got

engine: motul turbolight 4100 10-40 or 5-40

diffs: Castrol SAF-XA

gearbox: castrol syntrans 75w-85 or syntrax 75w-90

and the transfer case, attessa & powersteer can use the same: castrol Transmax Z

advice????? also oil filter advice? this my first swap on a modern car, used to simple escorts

i have heard (and this may be bollocks) that this is a yakuza run firm.... and you will be lucky to get the car at all..

there are some jzx100's and 90's that make me happy in the pants on this site :banana:

this one makes me wet

gc35_h-img600x450-1195283892jzx100-12.jpg

gc35_h-img600x450-1195283902jzx100-22.jpg

gc35_h-img600x450-1195283908jzx100-32.jpg

i accidentally posted this in the cars spotted thread lol, my bad....

im doing all my oil swaps this week, anyone with a 32 gtr got any advice???

so far i got

engine: motul turbolight 4100 10-40 or 5-40

diffs: Castrol SAF-XA

gearbox: castrol syntrans 75w-85 or syntrax 75w-90

and the transfer case, attessa & powersteer can use the same: castrol Transmax Z

advice????? also oil filter advice? this my first swap on a modern car, used to simple escorts

this is just some ruff notes i've got saved on my PC from a few years ago, nfi about if the prices are right etc, but it might help you figure out what you need

Engine: Motul 300V Power Racing 5w-30 $95/4lt, $38/2lt, $450/25lt

Manual Trans: Motul Gear 300 $24

Diff: 75-140???

PowerSteering: Dexron III: $9

HICAS: Dexron III $9

Brakes Motul RBF600 $30

Spark plugs: PFR6A / PFR5A (NGK platinum) - gapped to 1.1mm or 0.8mm if you are missing

Coolant: Nulon 9lt 50%

Transfer case oil: Nissan Matic D 1.8lt

Frount Diff oil: GL-5 85W-90 1.0lt 75-140???

Rear Diff Oil: LSD GL-5 80W-90 1.5lt 75-140???

Brake Fluid: RBF600

Clutch: RBF600

Power Steering Fluid: Nissan Power Steer fluid 1lt

Engine Oil: factory spec 7.5W-30/ 5W-30 4.6 litres

HICAS: Nissan Power Steer fluid 2lt

ATTESA: Nissan Power Steer fluid 2lt

Manual Trans: 75W-90 GL4. 4.1 litres - Redline lightweight Shockproof Gearbox Oil?

damo, get a hand controller, its definetly worth it, alot of people have had their car tuned then gone to drive it on the road only to realise they have a higher than safe knock level because the tuner didn't take into account the dyno is only a tuning tool and not the same as driving on the road. Plus you can keep an eye on boost levels aswell and chicks dig it.

yeah +1.

Also important to note the ramp rate the tuner is using......Shoot Out Mode (200) is a waste of time for the street, should be 150 or it will definitely run in different areas of the map (detonation city) on the bitumen and up hills.

just had Ryan n the guys at AUSSIE DYNO N TUNE tune my car today had a few issues with wheelspin but after putting ryan in the boot gave it a few runs and pulled a constant 300rwkw then on the last run pulled 327.4rwkw on only 19psi with only 18 knock level!!!!!

great guys down there fully reccomend them 2 any1!!

great talking 2 u Ryan top bloke, ill be back there with sum softer tyres n maybe biggr injectors so we can screw sum more boost in2 it maybe.....

http://myspacetv.com/index.cfm?fuseaction=...ideoid=41815405

Edited by ovrtym33
just had Ryan n the guys at AUSSIE DYNO N TUNE tune my car today had a few issues with wheelspin but after putting ryan in the boot gave it a few runs and pulled a constant 300rwkw then on the last run pulled 327.4rwkw on only 19psi with only 18 knock level!!!!!

great guys down there fully reccomend them 2 any1!!

great talking 2 u Ryan top bloke, ill be back there with sum softer tyres n maybe biggr injectors so we can screw sum more boost in2 it maybe.....

Top effort.

What are the specs? Turbo exhaust manifold? etc :thumbsup:

-----

The rb25 pfc can display a boost reading if you hook up a cheap map sensor.

Paulr33 has the info on in his PowerFC Faq on how to get it working.

Top effort.

What are the specs? Turbo exhaust manifold? etc :thumbsup:

-----

The rb25 pfc can display a boost reading if you hook up a cheap map sensor.

Paulr33 has the info on in his PowerFC Faq on how to get it working.

CP PISTONS

EAGLE RODS

1.2 HKS HEAD GASKET

GREDDY EXHAUST CAM GGEAR

256' 264' HKS CAMS

TURBOSMART EXTERNAL WASTEGATE

X FORCE HIGH MOUNT EXHAUST MANIFIOLD

GARRETT GT 30/40 .82

POWER FC

555 NISMO INJETERS

TOMEI FUEL REG

CROWER VALVE SPRINGS

ETC..................

oooooo i might just do that, i have a feeling it's a "friends" friend coz she sent me a msg

saying she was getting threating calls aswel.

might get him to check out another number aswel, had 3missed calls from it then sent a msg

asking who it was and haven't got anything back from the number lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...