Jump to content
SAU Community

Recommended Posts

for sure Dan; you ignore just about any price you'd see on the piece of paper hanging in the window of a car at a car yard.

jeez i remember the price listed in the window of my white 33 (in my avatar) when i bought it from a yard back in the day... we knocked quite a sum of that price off compared to what i paid :)

guys need ya help palease :)

oka so went to go see my car today down at premier paint n panel n its finally coming together..yay..but a lil problem has occured..they have gotten my car to start and god does it sound good to finally here it again lol but now my hicas light is on and the steering is heavy as...ive had the hicas light on before but the steering wasnt affected..all i did was change the power steering fluid and it went away.

the guy said that had to disconnect some hoses around the power steering pump to do some work so im hoping that it just needs a top up of some fluid

would i be right??? or is it something else??

there hoping to have my car finished by this friday....cant wait :)

ur help will be appreciated.thanks

you will prob find that due to the car sitting around for so long, all the fluid has drained from the lines, and dried up.

give it another change, and see how you go :)

good to hear its nearly done...

This might not be the issue, but my Hicas light was on a while back and the steering was really heavy. It turned out to be a loose battery terminal (no bullshit). New terminal and the issue went away.

Check that, but more than likely it won't be that.

But check the power steering fluid and the hose connections.

Last night after work i decided to go to town on my dump pipes with a die grinder. Where the 2 pipes join together i ground out the hole to perfectly match the shape of the smaller pipe, spent about 1 hour on them as they are stainless so had to try and keep the metal cool. It should help to improve exhaust flow a fair bit :wacko:

post-51334-1224575807_thumb.jpg

hmm, how are b pillars stuck on? (The black plastic that is between the front and rear side windows) just glue?

On 33's theres a couple of lugs behind there, just pull the bottom out gently until it unclips (you may need a flathead) then lift it upwards. I've never tried doing it on a 34 so it might be different.

went and had my car remapped at turbo tune today and i gained 34 rwkw out of it

first run pulled 88.1 rwkw with a blocked fuel filter and fooked fuel pump..so replaced both of them and it pulled 111.2 rwkw

then after the remap it pulled 122.2rwkw..

im pretty happy with it considering the only mods are HD clutch, 2.5" full exhaust system with race cat and K&N panel filter

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...