Jump to content
SAU Community

Recommended Posts

Vu,

Did you pull the squeel shims off the old brake pads and clipped them on to the new? 'Sometimes' its easy not to see the squeel shims on the old pads if they are dirty and full of brake dust.

Had a mechanic fit the brake pads and rotors up and yeah he did the shims - everything looked to be done well and bedding in was done according to the instructions from the brake pads. I'm gonna take the pads out sometime in the next couple days get some anti-squealing shiz into it see how it goes then... damn thing is driving me nuts!

yeah my EBC Redstuff (ceramic) is doing the same thing now....loud as with a medium pedal but goes away with hard braking and I used the stick on anti squeal pads to

ive got the same pads pete but i have not had a problem with them squealing did you bed them in properly.?

yeah they have that thin compound on them that requires light to medium use initially before giving them the usual bed in process (from 100kph down to 15kph several times till hot then cool down and repeat if necessary)

I haven't done that final process yet cause they were only put in 150 km ago but I think they may be ready for the final process now.........hope that fixes it.

On another note, do they bite those rotors or what.....very unforgiving even on initial grab and wants to throw you thru the windscreen everytime, lol

yeah they have that thin compound on them that requires light to medium use initially before giving them the usual bed in process (from 100kph down to 15kph several times till hot then cool down and repeat if necessary)

I dont know if thats meant to be done with my brake pads but hell I'm going to give that a try see if that works!

anyone keen to come bowling friday night? Salisbury Bowland, 8:00, $19 for 3 hours of bowling

Friday night is my Vili's and cruise night :) do you remember that place?? its where most of use to hang out on Friday nights :)

yeah they have that thin compound on them that requires light to medium use initially before giving them the usual bed in process (from 100kph down to 15kph several times till hot then cool down and repeat if necessary)

I haven't done that final process yet cause they were only put in 150 km ago but I think they may be ready for the final process now.........hope that fixes it.

On another note, do they bite those rotors or what.....very unforgiving even on initial grab and wants to throw you thru the windscreen everytime, lol

I put a chamfered angle on the leading edge of new brake pads to stop them sqeeling.... nothing over the top use a file and take the sharp edge away. it has alwayz worked for me :)

i did the same with my pads mick, made the squeeling stop enough for me to hear my dodgy wheel bearing on the front passenger side :)

i remember reading on here a while back that one of the SAU members works for CBC, any one remember who?

i did the same with my pads mick, made the squeeling stop enough for me to hear my dodgy wheel bearing on the front passenger side :D

that could be a blessing in disguise.... not fun when they collapse totally :)

Had a mechanic fit the brake pads and rotors up and yeah he did the shims - everything looked to be done well and bedding in was done according to the instructions from the brake pads. I'm gonna take the pads out sometime in the next couple days get some anti-squealing shiz into it see how it goes then... damn thing is driving me nuts!

i have some red goo stuff that heslo luke told be to buy when he did my rotors

and pads,

never heard on squeel from my brakes, no matter how hot they got,

its still pretty much full tube, you can have it

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...