Jump to content
SAU Community

Recommended Posts

Hi everyone im back :P im now living in my new house :huh: my laptop shat itself last week so i gave it to my mate to fix and only just got it back today, so what have i missed??

everything babe just go back about 300 pages and you will be ok

Rb30 keeps the 4wd and the low mounts (as low mounts are part of the head).

Everything bolts on as per normal. The sump adaptor bolts on to the bottom of the rb30 block and then on to the 4wd sump/diff.

-----

3k.. Sounds like an AFM issue. Make sure all the IC pipes are connected properly.

probably roughly 10k i assume for HKS version

Wanna keep the 4wd tho, and twin low mount's

Also Cubes brother has a R32gts-t got new coilpacks, plugs and serviced recently. anything over 3k the car starts chugging, any idea what it would be?

what cubes said! tell craig to get another afm. if he wants he can test mine out on his 32.

the cars gone into limp mode or whatever its called. happened to me and its a pain to drive!

hey ruby.... looking at getting a motor bike...

wats a good bike to look at? beginner also :thumbsup:

why you asking him.........you know what he's gonna say

"if it aint Italian, it aint worth havin", lol

Here's a bit of education for you:

2008 Fat Boy

FLSTFFatBoy2008.jpg

2008 Night Rod Special

VRSCDX-ANightRodSpecial2008.jpg

2008 Road King Classic

FLHRCRoadKingClassic2008.jpg

oka so should i go a hks hipower or a hks silent hipower cat back exhaust for my 32???

oh and will an R32 GTR cat back one fit a gtst/gts4 ??

need ya opinions

cheers

Edited by vinnie32GTS4

well, Ive been quoted petrol money change out of 2grand to fit and tune the following:

Cometic intake manifold gasket

Cometic intake collector gasket

Cometic exhaust gasket

Cometic Head gasket 1.2mm x 87mm

ARP head stud kit

EPP 6mm viton Intake valve seals

EPP 6mm viton Exhaust valve seals

EPP Intake valve seats

EPP Exhaust valve seats

EPP Intake valve guides

EPP Exhaust valve guides

Q45 90mm throttle body

Greddy Q45-RB25 adapter kit

EPP clear cam gear timing belt cover

Tomei oil gallery restrictor orifice

Tomei hi-lift valve springs ~8.8mm

Tomei 256/256 poncam camshaft set

Gates Racing timing belt kit incl. tensioner and idler

2x 700cc Sard injector external intake manifold setup

ryco oil filter, oil filter magnet set & Motul 4100 turbolite 10/40w oil

Need a controller for the extra injectors tho........................

expect, with the sards, there should be enough fuel injc. headroom to push a nice comfortable 230kw tune., with heaps big torque

:thumbsup:

then thats it, bar pistons/rings and rods/bearings; maybe in 5yrs time. lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...