Jump to content
SAU Community

Recommended Posts

Question,

Just put my coilovers in. I had a wheel alignment done about a week ago, so my question is, do I need another one?

Took the car for a drive and it seems to drive as straight as before.

Question,

Just put my coilovers in. I had a wheel alignment done about a week ago, so my question is, do I need another one?

Took the car for a drive and it seems to drive as straight as before.

maybe you do! my car went straighter with coil overs in but the result when i got it alligned said otherwise

what sort of coil overs did you get?

maybe you do! my car went straighter with coil overs in but the result when i got it alligned said otherwise

what sort of coil overs did you get?

I might just as well go and get one anyways.

I got a second hand set of Bridgestone NPG's in mint condition. The ride feels very firm but not too bad over bumps either. Only problem is they're set pretty low and I don't have the wrenches to raise the car up a bit.

Edited by tx3_90
I might just as well go and get one anyways.

I got a second hand set of Bridgestone NPG's in mint condition. The ride feels very firm but not too bad over bumps either. Only problem is they're set pretty low and I don't have the wrenches to raise the car up a bit.

they feel good?

I might just as well go and get one anyways.

I got a second hand set of Bridgestone NPG's in mint condition. The ride feels very firm but not too bad over bumps either. Only problem is they're set pretty low and I don't have the wrenches to raise the car up a bit.

what sort of settings can you play with?

WOOT 1000 POSTS !1!111!11!!!111!!

Try this

already been on it mate , also found another removal guide in pdf form but they all show removal with the gearbox

is it possible to remove the engine and leave gearbox in the car still ?

also , wheres the best place to get an engine hoist and stand for a reasonable price?

cheers

I'd be interested in the PDF, could you link me to that?

Why you keen on removing the motor yourself? Save costs on rebuild?

here it is

its for a 32 GTR but i cant imagine it being all that different ?

yeah , i cant afford to take it somewhere to get rebuilt so me and my dad are gonna do it our selves :sick:

Nah, should be pretty much the same!

Old man ever rebuilt a motor before or you going in blind? Be careful and make sure you do some research before you start. A mate of mine did his 25 himself having never rebuilt a motor before and did a great job on it!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...