Jump to content
SAU Community

Recommended Posts

so, turbo people, looking at getting a new turbo for the s14, as the stocker is one its way out. not thinking anything massive, got it down to a garrett GT28R or GT28RS, just wondering if anyone here has any experience with them? ill probably end up browsing the forced induction forum soon, just seeing if theres anyone here whos used either first.
cheers krish, completely forgot about dale. shall have to have a chat with him. 34 turbo sounds interesting, thinking lag could be an issue with the missing 500cc though. just looking for nice streetable power, somewhere around the 150-160rwkw mark.

Hey Dave,

If there is nothing wrong with your turbo then I would keep it fit a boost controller and go see Jeff (SpeedLab) for a remap. For around $500-$700 (my remap was around at or below the lower end of that scale but SR's need a daughter board installed which the CA's don't and the board costs around $250 by itself) your current turbo you will make around the 190rwkw mark. I have a feeling that you will be near the limit of your AFM at that point and you won't want to go to much further with your standard injectors, but you should get there.

If you want to go bigger turbo then you will be looking at at least 550cc injectors (but 740cc are the same price and they will give you more scope for improvements in the future improvements) remember that with 4 cylinders you have to go bigger with your injectors to make the same power as a 6 as there are less of them.

You will also need to a bigger AFM; once again you have choices a Z32 will support around the 320-350rwkw mark but costs anywhere from $200-$300 where as a SII RB25 AFM will support 230-240rwkw and will cost you around $50, and really even if you go for a GT2860RS you won't be making 230kw without cams.

If your still after up upgrade i would suggest the GT2860RS as a GT28R (A.K.A T28BB) is only ever so slighlty bigger than what you have on there from the factory

I would forget about the GT2871R as it's too big for what you are looking for as it will support 230-240kw without cams and 250-260kw with cams but come at the cost of response (full boost at around 3700-4000 depending on cam setup).

Anything else just ask

Edited by D_Stirls
sorry im agreeing with the doh man, sounded like a steam train trying to take off at first and also like it stalled about 6times. crommies also terrible.

if you gonna go v8 go for elenor or gt40 :)

you guy's do realise that it's supercharged as well and that is why the idle is up and down like that.

P.S. i think it sounds absolutely TOUGH, but then i did grow up around BIG V8s.

http://www.youtube.com/watch?v=wJNM3sHcwBY...re=channel_page

See the front mount at 0.24

Edited by D_Stirls
meh i dont care if its got 2000hp it sounds terrible to me,

but ive always been a exotic loving anti v8 type of person :)

although i have developed soft spots for the 2 above v8 mentioned cars and shelby cobra's

I have a soft spot for 1967-1969 chevy camaro's... 1st series... even today they look frigging awesome...

-D

meh i dont care if its got 2000hp it sounds terrible to me,

but ive always been a exotic loving anti v8 type of person :)

although i have developed soft spots for the 2 above v8 mentioned cars and shelby cobra's

Well you'd hate this thing then cos' it has a dirty old V8 in it ;)

lol now that sounds tuff, has tt attached much like f40s which are also tuff :)

i just dont really like the valliant style box cars pencil ruler design and engines that sound like they stalling or have metal getting chewed up inside.

but thats me feel free to disagree ya'll ;) i drive a rusty dato anyway

Edited by Inline 6
anyone want stickers made up for their cars that have reflective properties? ie the stuff road signs are made from?

like so: 006.jpg

ill take a barracuda. in red.

Hey Dave,

If there is nothing wrong with your turbo then I would keep it fit a boost controller and go see Jeff (SpeedLab) for a remap. For around $500-$700 (my remap was around at or below the lower end of that scale but SR's need a daughter board installed which the CA's don't and the board costs around $250 by itself) your current turbo you will make around the 190rwkw mark. I have a feeling that you will be near the limit of your AFM at that point and you won't want to go to much further with your standard injectors, but you should get there.

If you want to go bigger turbo then you will be looking at at least 550cc injectors (but 740cc are the same price and they will give you more scope for improvements in the future improvements) remember that with 4 cylinders you have to go bigger with your injectors to make the same power as a 6 as there are less of them.

You will also need to a bigger AFM; once again you have choices a Z32 will support around the 320-350rwkw mark but costs anywhere from $200-$300 where as a SII RB25 AFM will support 230-240rwkw and will cost you around $50, and really even if you go for a GT2860RS you won't be making 230kw without cams.

If your still after up upgrade i would suggest the GT2860RS as a GT28R (A.K.A T28BB) is only ever so slighlty bigger than what you have on there from the factory

I would forget about the GT2871R as it's too big for what you are looking for as it will support 230-240kw without cams and 250-260kw with cams but come at the cost of response (full boost at around 3700-4000 depending on cam setup).

Anything else just ask

thanks for the advice mate. :)

fairly sure somethings not right with the current turbo, but ill wait til i pull it off the engine and have a good look at it. might just get it rebuilt and tuned.

cheers.

All this talking about ECU remapping has got me curious.

So, it's basically flashing the ECU? Everything on the outside/inside of the ECU is kept standard (eg. no chips soldered to it, etc) except the ROM data?

Would this mean, it's technically a way to get through Regency as opposed to having a Power FC or something else as your ECU?

All this talking about ECU remapping has got me curious.

So, it's basically flashing the ECU? Everything on the outside/inside of the ECU is kept standard (eg. no chips soldered to it, etc) except the ROM data?

Would this mean, it's technically a way to get through Regency as opposed to having a Power FC or something else as your ECU?

Yes and no... you can reflash an ECU with another set of firmware which may or may not contain an updated map...

The map is EEPROM which stores a spreadsheet of air fuel ratios and other assorted timings, and is done by using a laptop in most cases, and can sometimes be done without any mods... r32 gtr ecu is reprogrammable but the 33 and 34's arent iirc. Thats one of the reasons people like to switch to aftermarket ecu's like PFC's because of the ability to change heaps of settings..

-D

and, lets face it, chicks dig live readouts on the pfc hand controller.

i dont haz pfc, oldschool gameboy with LAN cord going from gameboy to behind the dash will have to do till the funds allow :P

scandy, 3 spoke rims are made of fail............ IMHO

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...