Jump to content
SAU Community

Recommended Posts

had to sign papers and put down a non-refundable deposit

There's no way I'd be signing or paying anything for a test drive especially in the current economical climate where they should be pretty much licking your balls to get a sale.

Maybe they have too many cashed up kids with car loans and not enough cars!

I told them they could hold on to my car! still wouldnt. Even said let my dad drive cos hes old, still wouldnt.

Def suss. Checked out their (lame) website ... which is conveniently linked to the Trading Post.

They have another R34 there with more kms at a higher price? Their pricing is all over the place. :/

Here is the said car:

Interior: unplugged boost gauge in A-pillar? Or just a random wire hanging out? What's the kill-switch for? Steering wheel is worn, yes, but not as bad as what I thought it'd be (sweaty hands, etc can wear away the leather), floor matt's worn or just white lines on them?

Yeah I looked at the other one as well a month or two back!

They had the same story about not having history. I didnt like the engine, was traces of oil leaks and wasnt as quiet as the other one.

Couldnt tell me if it has done is 100,000kms service or anything at all.

Its more expensive because they are selling it for another yard or something and they cant drop the price.

Thats the last visit they will have from me.

Interior: unplugged boost gauge in A-pillar? Or just a random wire hanging out? What's the kill-switch for? Steering wheel is worn, yes, but not as bad as what I thought it'd be (sweaty hands, etc can wear away the leather), floor matt's worn or just white lines on them?

I think the wire was the alarm light but the guy there didnt even know.

I'm pretty sure the red switch was the boost controller, he also didnt know.

Floor matts have white lines, but there were a few holes under them, and another one by the corner of the mat like it had rubbed through.

You cant see the burn mark on the body kit in those photos as it is on the inner side.

By looking at even that shot of the interior it's definitely done more than 64K. Mine has 100K+ and is in much better condition

My r32 gtr didnt even look that worn when I bought it... and it was 18 years old at the time ;\ sounds like that poor car has had a hard life

-D

I think the wire was the alarm light but the guy there didnt even know.

I'm pretty sure the red switch was the boost controller, he also didnt know.

Floor matts have white lines, but there were a few holes under them, and another one by the corner of the mat like it had rubbed through.

You cant see the burn mark on the body kit in those photos as it is on the inner side.

would be interesting to see if the cops had another blitz on import yards, how many would remain in the lot without a yellow canary......not knowing the product that you're selling is just no excuse for apparent ignorance (cops would agree)......they could be selling you a ticking bomb

Sounds all like Synergy Motorsport to me!!

Mate looked at a Supra, had to sign papers and put down a non-refundable deposit, etc after a test drive even though he wasn't keen on it at all after the test drive.

Penny,thats duress into signing a contract, dont do it, im pretty sure its not legal, in usa they will pull the salesmen's license for it and fine the car lot. in this economy they think they can assure a sale since they have a deposit.

and not getting into the above mentioned lot, simply put, dont buy from them, PM me for long list of reasons why.

oil leaks on a low K skyline? means its been taken apart??? they dont get oil leaks for the most part, rocker covers might seep a tiny bit.

my car has 65,000k on it and that one has had a rough life from the looks of it... keep looking or import one?

that isnt a alarm wire hanging out, and the red switch could go to anything, old driving lights ???????

Anyone else ever catch the BBC comedy series "Coupling"? I loved the first 3 series with the original "Jeffery" :down:

"My mother use to make sculptures of erections when I was young. Kept them all over the house. Some came out wrong and they ended up in a box under my bed. You don't wanna know about my nightmares!" :P

More from Coupling:

Patrick: It was just so embarrassing. I didn't know what to do.

Steve: Happens to us all mate.

Jeff: All of us, in our time, are visited by the melty man.

Patrick: The what?

Jeff: Don't say his name, Patrick. Don't even think his name or he will rise from the shadow dimensions to do his evil work on your terrified pants.

Patrick: [chuckle] Terrified pants?

Steve: [gravely] There's nothing funny about the melty man, Patrick.

Patrick: [face falls] You know about the melty man, too?

Steve: [in a "duh!" voice] We all know the melty man.

Patrick: Who is he?

Steve: The archenemy of trouser confidence.

Jeff: Professor Moriarty. In groin form.

Steve: Darth Vader

Jeff: Without the helmet.

Patrick: [terrified and shocked] What does he do?

Jeff: Patrick, you *know* what he does.

Patrick: [looks down] Oh right.

Jeff: You're in bed with a woman. Everything's going fine. That's when the melty man strikes.

Steve: Suddenly you find yourself thinking, "Maybe she's really bored".

Jeff: Maybe you're licking her neck too much. Are you over-wetting her neck?

Steve: Are you spending an equal amount of time on each breast? I mean, what if one breast gets ahead?

Jeff: Should you be switching between them really quickly or should you squish 'em both together and do them at once

[demonstrates]

Patrick: [frowns]

Steve: Or should you skip one breast completely just to save time?

Jeff: She's wriggling about. Is that a good sign or is she just trying to dry her neck?

****************

Jane: I'm being stalked, actually, so I'm pretty secure in my attractiveness.

Susan: You're being stalked?

Jane: Is that so hard to believe?

Sally: My god!

Jane: Everyday on my way home from work, a man follows me. It's true.

Susan: Well, have you been to the police?

Jane: They said I was being silly and paranoid. I heard them laughing after I left.

Sally: That's terrible!

Susan: Well, have you confronted the man who follows you?

Jane: Well, there's no point, is there? It's never the same man twice. Sometimes they switch over when I'm halfway home. It's so well organized!

:down:

Edited by RubyRS4
would be interesting to see if the cops had another blitz on import yards, how many would remain in the lot without a yellow canary......not knowing the product that you're selling is just no excuse for apparent ignorance (cops would agree)......they could be selling you a ticking bomb

haha pete ,good point, I know of at least one lot that 90% of the cars would get the yellow sticker,,and they continue to install mods knowing they're defective and illegal.

they return the car to stock for inspection and mod it back up afterwards, not informing buyers about what is legal and not?

on top of that the service dept does some dangerous work, which they wont stand behind for 1 min

wouldnt the lot cop it legally for not having a waiver signed ???explaining the mods might not be road legal, waiving their liability???

If they are getting the cars from interstate wont they have to go through the check at regency?

Makes me wonder if they wait until its sold before they get that done as they dont have plates on them.....

If they are getting the cars from interstate wont they have to go through the check at regency?

Makes me wonder if they wait until its sold before they get that done as they dont have plates on them.....

Yes but they'd 'clean up the car' to get them through the ID check, remove the non-standard parts, etc. It's also a part of compliance, but they usually install the modded parts back on after compliance.

And I know for a fact, Synergy respray their cars that they import and remove all the dents, dings, etc prior to putting the car into their car yard - hence the slightly higher price, even if the respray is a single layer affair.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...