Jump to content
SAU Community

Recommended Posts

Ill lend you mine then :) biggest s box of them all. people can't cross it without staring

understand the feeling though its a pain in the rear trying to deal with these companys when they want to be difficult. shame customer satisfaction is not a top priority

Tafe cert 3 is a waste, Ben and I had this discussion a few weeks ago,,, the IT market in Adelaide is saturated which drives the pay down, but hey if you want a job, EDS helpdesk will hire you... they will hire anyone with a heartbeat and can turn on a PC..lol

a few good jobs exist in IT, mostly working out on military projects in the dirty north.

too many kids will work in IT for 25k in this town..lol when before they would command 45k + which is still lousy pay for how much you have to know

Yeah it took me a long time to earn the wage I get now, and its all based upon actual skills (I'm not yet RHCE certified but close)... $35-45k jobs were all I was able to get up until a couple of years ago when I had some specific skills that were required (and my 15 years experience in the field).... EDS, CSC, etc are all big corps that pay a decent wage for their employees however it can be a bit like shooting yourself in the foot - you can get stuck doing mundane work without actually learning anything and thats where the problem lies - in IT you constantly have to be upskilling as the industry changes every few months (hardware, software, marketing directions, financial climate etc)... and it can change very very quickly.

If I was doing in Syd what I'm doing here, I'd probably be earning another $20k on top... that seems to be the general rule of thumb... only downer is Sydney is expensive and that extra $20k really negates itself in terms of lifestyle.. hopefully we start getting paid more as our cost of living increases but so far its been a bit disappointing.

Other thing with IT is that there are loads of people who say they deliver services, such as onsite companies and PC repair shops but the actually skilling is generally disapoointing. There are also a lot of dodgy people in the IT game that don't care about reputation or the quality of their work and they let it down for everyone. I've had the fortune to work at some great places (like my current employer) but sad to say at least half the places I've worked have left me very disappointed with their ethics, management or simply their procedures (or lack thereof)...

-D

EDIT : The only things that are defence related in IT are generally software development. DSTO is a client of ours and we look after their infrastructure and certain niche applications but the lions share of defence work is code.

Edited by Dohmar
Hrmm... how about these??

img-resized.png Reduced 87%post-34819-1240289238_thumb.jpg 1151 x 620 (165.66K)//

And thats how good quality dumps should look, not like the crap poor Dave got landed with

:) to GKTech

Edited by Jamesrb25

the GKtech stuff is normally pretty good i have not really ever heard of any complaits on NS which is where Greg sells most of his stuff. Reason it look shitty on the inside is because it's welded on the inside, pretty much all the other dumps (Advance, CES) are only welded on the rear of the flange and not on the inside.

If you get your money back go and get an advance one piece, they are as good as CES IMO and they are in Adelaide.

http://www.advanceheaders.com.au/

180SXlg.jpg

yeah, i could be making something out of nothing, but that pic doesnt show how jagged it is in places, ill have it cleaned up and see how it goes, then ill look into the am and advance options.

img-resized.png Reduced 87%post-34819-1240289238_thumb.jpg 1151 x 620 (165.66K)//

And thats how good quality dumps should look, not like the crap poor Dave got landed with

:) to GKTech

lol, those bellmouths probably cost 4 times more as well.......same old story, you get what you pay for.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...