Jump to content
SAU Community

Recommended Posts

FFS, my RB20 does not like stock bovs and I've got no fking idea whats causing it :dry:

It struggles to get to .4 bar at full throttle. With the bov blocked it makes .8 no worries. Also of interest is that the bov doesn't open properly when it's plumbed in. Opens briefly at full throttle but still flutters like mad otherwise, like it's not even opening. My old 32 would NEVER flutter with the bov plumbed in, like it opened even backing off at 0 boost.

On the plus side it seems pretty controllable to slide, even on stock sus with a weak viscous diff :P

Edited by AndrewJZX100

anyone got a ute/van/wagon etc and wanna earn $20 ??

i need to take my un-assembled bottom end to turbo tune and i dont have a working car !!

reply here or pm me or call me 0419848600

willing to pay more if you have to travel !

could be a leak on your BOV by the sounds of things andrew....

try another stock BOV if you can get your hands on it mate..

Thats what I thought, so I did just that and it does the same thing :dry:

Stock RB20 one does it and stock RB25 s2 that I just bought does it as well. I'm thinking maybe a vac line somewhere might be a bit suspect.

Thats what I thought, so I did just that and it does the same thing :dry:

Stock RB20 one does it and stock RB25 s2 that I just bought does it as well. I'm thinking maybe a vac line somewhere might be a bit suspect.

i would say that if its making the right boost when the BOV is blocked off then just leave it blocked off....Flutter FTMFW

but now it sounds like the vac line from the BOV to the plennum is leaking or something strange is happening

let us know when you find out what the problem was mate

good luck

PS flutters man leave it fluttering lol

anyone got a ute/van/wagon etc and wanna earn $20 ??

i need to take my un-assembled bottom end to turbo tune and i dont have a working car !!

reply here or pm me or call me 0419848600

willing to pay more if you have to travel !

PM sent

Not real keen on the flutter hey :P

Well, not all the time. Sometimes it's good (like driving through Mt Barker around 3:30 on a school day :P ) but yeah mostly it's just annoying.

What are you doing near a school andrew....specially on a school day :dry::P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...