Jump to content
SAU Community

Recommended Posts

Thinking about doing a runner from cabbie.......

http://au.news.yahoo.com/a/-/latest/553357...ie-boy-run-down

Cab drivers are scum!

Try riding a bike around the city at night. I've had a few mates intentionally hit by these pricks. Hit and runs are part of their job description. :O

With satelite tracking of all their vehicles and their log system today, shouldn't be too hard finding the attempted-murderer. If they can't, then you gotta suspect their covering bad drivers.

Sorry ... I hate, hate, hate cab drivers.

Edited by RubyRS4
Cab drivers are scum!

Try riding a bike around the city at night. I've had a few mates intentionally hit by these pricks. Hit and runs are part of their job description. :O

I shouldn't laugh but I had to......

Yes Damo extremely extreme imo

r33 gtr garret turbo(fully rebuilt) and receipts for all work done

fully custom big bore from the turbo

:O

And "Fully custom dyno tune" ?

Ebay are cocks! Been suspended for not paying an invoice ... which WAS paid 3 weeks ago. Not the first time this has happened. Their bookkeeping must suck ass. :)

My reply:

Dear disorganised payables department,

If you reconciled your accounts correctly you would have noticed this amount had been paid. 3 weeks ago in fact. This is not the first time you've suspended me for no reason at all, except that YOU got it wrong ... again! I know its real hard for you to match the numbers (again!) but with less porn downloading and more attention to your job, you might just get there one day.

Here is the reference (for the second time for THIS invoice) from my bank statement:

9 Apr 2009 DEBIT CARD PURCHASE EBAY INTL AG - AU 888-749-3229 AUS 55.98

Check your statements before suspending someone for no reason! Its a very simple business practice.

Signed Mr I-obviously-know-maths-better-than-you

:O

Ebay are cocks! Been suspended for not paying an invoice ... which WAS paid 3 weeks ago. Not the first time this has happened. Their bookkeeping must suck ass. :)

My reply:

:O

haha. stooges. i hate ebay and paypal, they all suck

-D

Ebay are cocks! Been suspended for not paying an invoice ... which WAS paid 3 weeks ago. Not the first time this has happened. Their bookkeeping must suck ass. :)

My reply:

:O

LOL! they certainly are a bunch of knobheads..... Ebay's new feedback system doesn't allow a seller to give negative feedback anymore, so when I had a no payer guess what...... I couldn't do sweet FA about it yet I get some smart arse (buyer from France) who opens a Paypal dispute against me because his capacitors didn't arrive within the week! Funds would not clear until he (the buyer) closed the dispute....

I wonder how high the bill has to be before they go through scary means to reconcile?

For a company thats an over-million dollar turnover business, we reconcile every 2 weeks. Ebay would have to do that minimum. 3 weeks its been! So they've missed it. How the hell they survive is any wonder. This is the 6-7 time I've been thru this in 3 years! I've already changed accounts 2 times for an assumed "unpaid bill". One account I kept paying, but they bounced the funds back (never gave an explanation) and kept adding a stupid $12 or so admin fee for it, so the bill went up and up, so I opened another account. f**k em!

As a bookkeeper and office manager myself, it shits me to bits that they're so disorganised. And thats just with me, how many other poor souls are just paying the bill again and again without knowing, simply because they don't like being suspended? :O

iv had that problem aswell ruby pubey.....

Sucks doesn't it Craigy waigey! :)

Edited by RubyRS4
yeh got it in an email today, sick shit, over $20! Even thought he is in the wrong and half deserved some pain for doing a runner anyway, running him over is a tad extreme.
Cab drivers are scum!

Try riding a bike around the city at night. I've had a few mates intentionally hit by these pricks. Hit and runs are part of their job description. :O

With satelite tracking of all their vehicles and their log system today, shouldn't be too hard finding the attempted-murderer. If they can't, then you gotta suspect their covering bad drivers.

Sorry ... I hate, hate, hate cab drivers.

before we judge all cabbie's as useless twats lets review,

many years ago i was with a drug fked mate who used to do this sort of thing with out even telling you so before you knew it hes running and you have to follow suit or look like a twat explaining why your cashed up mate bailed, one day the cabbie asked if we minded if he stopped i forget for what reason but my mate decides to go through his car and finds a bank plastic envelope the clear sort with $50 $20 $10 printed on them full of folding stuff i reckon there was like $600 in it he shows me and goes lets run so yeah that's my story, and i think compassion on both sides is needed sure the cabbie shouldn't of done that but put in pressured situations even a sane mad can do silly things

haha. stooges. i hate ebay and paypal, they all suck

-D

Trading Post now has an ebay style of running there website

I'm with you there Ben and especially, as Talbo said, the 2+ abreast riders that have no concern for their own safety..........unfortunately, if you were stationary in the middle of the road, turning right into a side street, and he in fact was going straight in a designated bike lane (not splitting lanes), guess who had 100% right of way?

A couple of years ago the wife was in this exact scenario, except she was in her Laser in the left hand car slip-lane coming to turn left from Muller's Road onto Main North Road at Sefton Park. The normal 2 lanes of traffic were full of stationary cars and she went down the left hand slip lane in order to turn left. Some stupid woman turned straight in front of her between the 2 stationary rows of cars and Carolyn T-boned her. Guess what - 100% the other lady's fault, as Carolyn was travelling in a straight line in her lane, and the other woman pulled out in front of her and Carolyn had no way to see her prior, nor to stop.

I can't see how this bike scenario is any different. The turning car is the one who has to give way 100%. The bike travelling in a straight line has to give way to NO-ONE. Regardless of what a cop on the phone told you Ben, I think you would find you would be the vast majority if not 100% in the wrong.

I make a point to NEVER pull between stationary cars to turn - even if they leave you a gap to do so - it is just too risky if you can't see who you are pulling out in front of. Just because you can't see them, doesn't mean a cyclist or motorcyclist isn't there.

I can't see how this bike scenario is any different. The turning car is the one who has to give way 100%. The bike travelling in a straight line has to give way to NO-ONE. Regardless of what a cop on the phone told you Ben, I think you would find you would be the vast majority if not 100% in the wrong.

Nope. Transport SA says "Although the law gives you the same rights and responsibilities as other road users, all road users may not be aware of this. You are more easily injured than motor vehicle occupants are and it is therefore safer for you to be highly visible and look out for other road users when riding. The law does not give anyone indisputable right of way. Do not assume that another road user is going to give way"

Black & White baby

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...