Jump to content
SAU Community

Recommended Posts

Me and the boss tried driving through the city before, got caught in a heap of traffic in with a heap of Rebels members in hire cars. They were cutting off everyone and telling others to move out the way while they were driving along.

Few doing U turns at lights in front of the cops, cops did nothing. All the cops are shitting themselves.

Traffic at the moment in town is f**ked - they had North tce blocked off completely before.

Wooo coilover fitment = success :bunny:

Bought about $100 of sockets and ratchet/bars etc and was like fk $100 for that shit but it was a lot easier with some decent tools, my other socket set is no good for suspension shit :banana:

Was thinking of having a crack at the sway bars too but CBF set in and now I'm on here :banana:

Me and the boss tried driving through the city before, got caught in a heap of traffic in with a heap of Rebels members in hire cars. They were cutting off everyone and telling others to move out the way while they were driving along.

Few doing U turns at lights in front of the cops, cops did nothing. All the cops are shitting themselves.

Traffic at the moment in town is f**ked - they had North tce blocked off completely before.

Yeah, all the traffic cops were setting up as I rolled past in the Stagea. They all just stared as I cruised past them. Think I got in just before they close off North Terrace.

Wonder if the hire car company are expecting cars back with bullet holes? :banana:

So those bolts worked fine? The right length?

Yep, thanks heaps for that mate. The tyres were hitting the bottom spring perch at first but I planned to raise them to stock height anyway and once I did they cleared but only just :banana:

Now to save for a few weeks and find some rear coils.

also decided on the wheels i want for the 31. purely cos id rather build the car around the wheels

http://www.roh.com.au/modularseriesventuro.php

chrome dish, gloss black centres. 10.5s will have at least 16cm of forward facing dish :P

17x9.5 -20 front - most likely run a 225 or 235/45/17 Kuhmo KU36 motorsport tyre

17x10.5 -20 rear - more than likely run a 235 Kuhmo Admiral on the rear for skiddies, or 255 KU36s for grip

Carl, if i was single mate, id be havin a chat to ya bout that vacancy!!

fark i miss those single days sometimes!!!!

mmmmmmmmmm bundy and girls...........................................................................

................................

:P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...