Jump to content
SAU Community

Recommended Posts

What do you guys think of these wheels, to go on a black 4 door lowered car

r505black02.JPG

I have been looking at CE28Ns, but they won't have much dish, at the offset I need. these however have a different design, so offer 3" dish on the rears, and 2.5" dish on the front. I reckon they would look pretty porn on my new car. I know they aren't a Jap brand, but I am not overly concerned. And they are half the price of CE28Ns. And no, they are NOT Chinese made fyi.

wheels i would approve of;

work euroline fs;

0.51807900%201180170851_51.jpg

work euroline dz;

W_work_EurolineDZ_Silver.jpg

work euroline sl;

spd_20090329122211_b.jpg

ssr agle premium;

agle_03.JPG

ssr agle strusse;

SSR_AGLE_STRUSSE.jpg

ssr vienna dish;

SSR_4.jpg

ssr vienna sovreign;

full_736_p21496.jpg

garson zuenglein dr302;

garson.jpg

garson zuenglein dr301;

Zuenglein(DR301).jpg

piaa rozza stellars.

and a whole bunch of others are sufficiently filthy for vip style.

What a shit day!

I woke up with a headache. Did some housework. Watched the Crows lose after getting reamed by the umpires in the first half. Decide to go and wash my car and get done by a red light/speed camera on the way to the car wash. I was doing exactly 80kmph in an 80 zone and was well into the intersection before the light went red. F**king $300 odd dollar car wash! How can you contest the bloody tickets without risking an even greater fine?

I should have stayed in bed.

You'll get a sequential photograph set with the fine if they decide to fine you for it. If you were over the line before the light went red then I wouldnt be too worried because you'll be safe. Light has to be red before u cross the light for u to get the fine..

-D

i'd say $2000 for a scratched set and $2500 for a clean set. 33 GTR rims are around the $1300>$1500 mark.

I'd sell them for no less than $2200 as it cost me $400 to get them fixed up and 2pac resprayed and they have no scratches at all.

post-51334-1249177574_thumb.jpg

post-51334-1249177719_thumb.jpg

What do you guys think of these wheels, to go on a black 4 door lowered car

r505black02.JPG

I have been looking at CE28Ns, but they won't have much dish, at the offset I need. these however have a different design, so offer 3" dish on the rears, and 2.5" dish on the front. I reckon they would look pretty porn on my new car. I know they aren't a Jap brand, but I am not overly concerned. And they are half the price of CE28Ns. And no, they are NOT Chinese made fyi.

They're not made in China, but they're probably made in Thailand :happy: Ahh.. who cares anyway mate? As long as they're reasonable quality (at least with a decent manufacturers warranty) and you like 'em, that's all that matters isn't it?

I fitted a new set of rims to my car about a month or so back, Lenso D1R, in Hypersilver. They aren't Japanese brand name wheels, in fact I replaced a set of genuine Volk Rays with them, but they look better than the old VR rims - 18" vs. 17" - and are fairly light weight.

wheels i would approve of;

work euroline fs;

0.51807900%201180170851_51.jpg

work euroline dz;

W_work_EurolineDZ_Silver.jpg

work euroline sl;

spd_20090329122211_b.jpg

ssr agle premium;

agle_03.JPG

ssr agle strusse;

SSR_AGLE_STRUSSE.jpg

ssr vienna dish;

SSR_4.jpg

ssr vienna sovreign;

full_736_p21496.jpg

garson zuenglein dr302;

garson.jpg

garson zuenglein dr301;

Zuenglein(DR301).jpg

piaa rozza stellars.

and a whole bunch of others are sufficiently filthy for vip style.

It's all a matter of personal preference/taste, but most of those examples look like absolute poo to me! :happy: Not a fan of the VIP style wheel.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thank you for the feedback bro. Looks like it’ll have to stay off the road till it gets an ecu 
    • Only if you do not You will not be able to drive it with any serious load without risk of it pinging, which will either slowly or rapidly kill it, depending on how bad it is.
    • Hi guys, I’m new to the GTR scene. Picked up an R33 GTR earlier this year that needs a lot of love. I’ve been going through the hot side, changing all the gaskets and while it was all off I managed to score a set of -9s. It still had the stock ceramics so I was pretty happy to get the 2860s.  I live in a small country in the pacific with 0 performance car scene. No dyno’s no performance parts, let alone stock parts for a skyline. I order everything from Australia and do it myself. This means I’ll be running the stock ECU. Maybe down the track I’ll get an aftermarket set up and do a remote tune.  Will the car run -9s on stock tune safely?  I have a very heavy foot so I really hope so 😂   thanks guys   
    • perfect, no rush to address the leaking bush then, it's not doing much/anything
    • I'm not sure if it will bolt up, but.... I'm reasonably sure that the ID of the runners is somewhat smaller on the NAs. So it probably wouldn't be a good match at the flange where the top and bottom meet. So that would be a reason to not do it. And the skinny runners would be the bit you're keeping, which would be a reason to no do it. You'd want the big runners if you were doing any work to swap stuff. Why not just use what you've got, like nearly everyone else who has +T'd an NA? You don't need or want the TCS throttle or other stuff that is specifically DET inlet/crossover.
×
×
  • Create New...