Jump to content
SAU Community

Recommended Posts

Got a spare 23k burning a hole your pocket ?????

n1builteng1.jpg

- Brand New R33 GTR N1 Long Motor

- Fully Assembled

- All Components Brand new

- Ready to Install

- 500PS Package

Engine Package Includes:

- Front Differential

- Sump

- Tomei 1.2mm Metal Head Gasket

- Tomei Metal Intake Manifold Gaskets

- Tomei Metal Exhaust Manifold Gaskets

- Tomei Poncam Type B Camshafts (260 Deg/9.15mm)

- JJR Adjustable Cam Gears

- Sard 700cc Injectors

- Sard Dual Entry Fuel Rail

- HPI Stainless Dump Pipes

- SSI Premium Stainless Exhaust Manifolds

- HKS GT-SS Twin Turbo Kit

- Gates Strengthened Silicone Timing Belt

- Trust Clear Timing Belt Cover

- Nismo Engine Oil Cooler Sandwich Plate

- Nismo Engine Mounts

- JJR Direct Ignition Coil Packs

- NGK BCPR6EIX-11 Iridium Spark Plug Set

- N1 Oil Pump

- N1 Water Pump

- Cooling-Pro Silicone Water Hose Set

- Ceramic Coated Plenum

- R34 GTR NUR Coil Cover Emblem

- HKS Oil Cap

- New Genuine Nissan Air Regulator

Engine Internal Specifications:

Displacement: 2568cc

Bore: 86mm

Stroke: 73.7mm

Compression: 8.5:1

Block: N1

Pistons: N1

Conrods: N1

Just Jap

Got any pics Dale? Looking for a more "fitted" rim for my 31, has some sort of 4 stud Nissan rims on it with a very high positive offset.

I also have some 17x7 rims that you can have for $550 they are copies of the rims i have on my 180 (Volk GT-P's), they have 3 legal tyres on them and one that has to much camber wear. I was going to use the 17's fro track rims but now that i'm fitting a RB25 i'll be going 5 stud.

Here's the pics 17x7's on the LHS and 15x6.5 on the RHS;

post-27020-1251438697_thumb.jpg

Edited by D_Stirls

ruby, malpassi's are know for making the squeeling noise on startup. sometimes from new. havnt had any fail on me, but i wouldnt doubt they do. personally i like aeromotive. has yours got a black or silver top? black is 1.7:1, silver is 1:1

I think my car is the anti christ! Just finished new pads and rotors, gearbox oil, diff oil, engine oil and filter change and a good wash down under the bonnet. Take it for a spin last night to bed the rotors and pads in, and discover i now have another coolant leak! Seems to be coming from around the water pump, that was only put on 10k ago! Hoping its just a loose bolt and not a shagged pump!

I think my car is the anti christ! Just finished new pads and rotors, gearbox oil, diff oil, engine oil and filter change and a good wash down under the bonnet. Take it for a spin last night to bed the rotors and pads in, and discover i now have another coolant leak! Seems to be coming from around the water pump, that was only put on 10k ago! Hoping its just a loose bolt and not a shagged pump!

yeah i know what thats like

i got a new isc52mm radiator, n1 water pump, racing hose and nismo coolant put in earlier this yr

next day i lose 20% of my coolant via a cracked hose in the heater core (back of the engine, real pain in the arse to get to)

ahh well

two steps forward, one back - always the way with the older cars

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
    • He means "as opposed to mechanical cable drive". Older cars (R32 for ex.) had cable drive. Later cars with essentially the same gearbox, ie R34 GT (NA RB25) used essentially the same box as the R32 GTSt, but instead of a cable drive, had an electronic speed sender plugged into the same hole in the box, running from the same little gear that would have run the cable. Some of the shittier later cars use a speed sender on the nose of the diff, or the ABS sensors.
    • Lower than engine, or lower than it should at the hubs? Either way, that is a nice power figure and I'm not surprised you say it rips now. What stopped you from turning it up any more? Injectors? Or did it just stop responding to boost?
×
×
  • Create New...