Jump to content
SAU Community

Recommended Posts

check this thing out and their whole website. Want a 34R NUR with 18km on it?

http://www.zeleperformance.com/vehicle/r34...registered.html

I was at Zele in yokohama 2 weeks ago and had a look at it in the flesh!! ..... heres a few snaps.... 34s everywhere!

post-27804-1254362999_thumb.jpg

post-27804-1254363059_thumb.jpg

post-27804-1254363095_thumb.jpg

post-27804-1254363138_thumb.jpg

post-27804-1254363186_thumb.jpg

post-27804-1254363275_thumb.jpg

post-27804-1254363322_thumb.jpg

post-27804-1254363369_thumb.jpg

Should had gave me a msg on Facebook! I would had come out!

I hardly ever use facebook man, otherwise I would have haha.

Another time,

Dave bring on the mid week runs ftw I had a ball last night it was great.

Jarrad - some advice if you are looking for a R32 GTR. These cars are all pretty old now and if I were you I'd be looking for the following items (unless you want a standard one).

1. Sorted the oil pickup problem. I would look for a larger oil pump & a larger sump &/or baffle kit.

2. A R33 GTR long nose crank (or with a collar).

3. New turbos with steel wheels.

4. A rebuilt engine with forged internals - mainly pistons, piston rings & conrod bolts. The standard conrods are fine for up to 400rwkW.

BTW if you want 18x10" rims then you also need to consider what size & look of tyres you want. 275/35/18 will need the guards to be rolled. 255/35/18 will give you a stretched look. I personally wouldn't get anything wider than 9.5" (I have 18x10 +20 BBS LM rims on mine) as 10" rims also prevent you going to full lock when turning.

I say all this coming from experience (i have owned 2x R32 GTRs since March 2004) and the experience of many (but not all) others. It may cost you more $ to get a car with these mods but I promise this will be less than the dollars, time & heartache when one of the engine or turbos blow.

balls. id love to come for a run, but with the new pump in im not gonna be "driving" it until i get it dyno'd to check the afr's...

... and ive got a going away party that i "have" to make an appearance at...

... on the plus side, ive sold my spare wing... and the front end of the 200 is back together. :thumbsup:

lol, pretty well. its come a fair way from the stocker it was when i bought it...

... now i just need a pfc or something and a z32... hmmm...

Edited by scandyflick
hahahaah yeah i need a sump baffle :thumbsup: but if not sitting at high rpm all the time not too much of a drama

who wants to go for a cruise tonight?? ive got today/ tomorrow off.

I may be keen later on tonight if your still keen Jenkies?

HMMZ i might have to give it a miss actually guys, been playing pretty sht b ball lately so i better get my ass to training. would say can cruise after training but its pretty dodgy car park there and ill stink up the gtr :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...