Jump to content
SAU Community

Recommended Posts

yeah its all good

in 12 months time Im hoping it'll be heaps rosier

!

dr tonight asked when i needed him to do the p/work, so yeah Im relieved, 'cause its been so hard, and such a long daily struggle, just to get up out of bed on zero to 2hrs sleep a night, always in pain or spaced off your face due to prescriptions. a decade like that.

so 1 yr out of it to look soley into my rehab will be a good thing

hopefully life changing hey

cheers boys n girls

17" bronze drifteks so a little bit different to Chads

eventually i would like to put 255 all the way round for now will have to settle for 235 untill i can afford new tires my MAXXIS on the fronts were new before i went to melbourne this year the rears are on the wear indicator

lol Dave Ex's from the past are never a good idea to have coffee with :P

i can get NS2 255x17 for 190 i think

i told him there rubbish but he said there are a lot worse tyre like Antyre and Goodride to which im running Antyre on the rears atm

you can see that by going to My Assistant ^^^^

Dan the man is an admin would have to deal with a lot of stupid people asking crazy questions i say stupid becuase a lot of the time if people read through threads properly the answer is right in front of them

>>Top 20 Posters<<

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...