Jump to content
SAU Community

Recommended Posts

I am getting an alarm installed with twin immobiliser for my r33 skyline. The installer seems to think he cannont install the alarm/immobiliser with the turbo timer. Has anyone done this themselves? or know how to do it? Please advise me on this so i might be able to advise them.

He said it had to do with the alarm and australian standards.

thanks

Link to comment
https://www.sau.com.au/forums/topic/18849-alarm-with-turbo-timer/
Share on other sites

I have a HKS type 1 turbo timer with my alarm/immobiliser and they work fine together. I didn't do the wiring myself but I know it has been done via a relay, so when you turn the key off the alarm recognise that and the engine keep running off the turbo timer. There are no security issues because you are not bypassing anything just separating the two devices with the relay.

I have heard that some alarms either have provision for a timer, or inbuilt timers. If not it can be done via a relay as mine has been done.

Sorry I can't tell you exactly how the wiring is done, as I got it done by the guy who did my stereo install. I had been told by a few people that it couldn't be done also till I came across this guy. He just said alot of guys aren't aware how its done because it isn't that common, and that most guys that do these installs aren't true auto electricans.

Dunno how much truth there is in that, all I know is that mine now works and I can't fault any of the work he did. It is all quality, tidy work.

firstly, you cannot have the feature whereby the doors unlock when the engine dies

secondly, you need a bypass chip that allows u to look your car and immobilise after the engine dies. the chip cost me 38 bucks to add on to my pre-existing alarm.

send it to the shop that fitted your alarm and if the seem incompetent, send to another agent that does the same type of alarms :) hope that helps

firstly, you cannot have the feature whereby the doors unlock when the engine dies

yes this is true however you can have it so when you turn the key and pull it out the doors unlock then the turbo timer counts down. then you get out and lock the car via remote and the alarm arms. well thats my car anyways. oh and when you turn the car on both doors automatically lock.. pretty cool.

also when my car is being run via the turbo timer and you lower the handbrake it cuts out

as long as the immoboliser is not wiered to the fuel pomp the car will still run upn till the timer shuts down most ov the time thay cill the egnishon so theat u cant start it and when the hand brake is let down the car will stall and u cant start it with out the remote the key less entery shoud b abell to lock the car and armit if this is dun

this is what mine does.

i start boosting warhhhhh pshhhh pshhh ect you get the idear.

see some hot chicks, pull over.

decide im so cool that i turn off my ignition.

my blitz turbo timer kicks in, set for 1min or there abouts.

if i dont lock my car the imobiliser automaticlly sets after 30secconds.

if i lock the car the imobiliser is armed and the car is locked.

if i was to be in the car and locked myself in (which i tried) and put the key back in and try start it, the car turns off alarm sirens.

then my cars all locked, i go talk to da hot chix.

and all is cool.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...