Engine Light

[Joe]

Hey Guys,

Im a proud new order of a 300GT sedan, but as i was driving home the engine light turned on.

Now when i turn the car on, theres a small announcement in Japaneses about it, as it shows up on the screen.

I was reading on the G35driver website and they said check the oil. ive checked it and even replaced the oil and filter

but the light is still on.

Has any1 had problems with the engine light on the dash?

Thanks,

Joey.

[NA_R33]

I have had problems with it for a week...

Do this:

Turn ignition on (dont start it)

Wait 3 seconds

Press the accelerator down fully and release it 5 times within 5 seconds

Wait 10 secs

Press and hold the accelerator down fully for 10 secs (at the 10 second mark the engine light should start blinking...

Now it will blink 10 times slowly and then blink the error code...

To clear the codes press the accelerator down fully again and hold for another 10secs let it go wait 10 seconds and turn the ignition off.. This will clear the codes.. but wont stop the light coming back on if there is still a fault somewhere.

You can download the workshop manual from 350z-tech.com it tells you all about it and the codes and what they mean.

Ive been systamatically checkin every damn sensor in mine for the last few days.. If ur in brissy by all means bring it down to the workshop and ill have a look at it for ya..

[Joe]

I have had problems with it for a week...

Do this:

Turn ignition on (dont start it)

Wait 3 seconds

Press the accelerator down fully and release it 5 times within 5 seconds

Wait 10 secs

Press and hold the accelerator down fully for 10 secs (at the 10 second mark the engine light should start blinking...

Now it will blink 10 times slowly and then blink the error code...

To clear the codes press the accelerator down fully again and hold for another 10secs let it go wait 10 seconds and turn the ignition off.. This will clear the codes.. but wont stop the light coming back on if there is still a fault somewhere.

You can download the workshop manual from 350z-tech.com it tells you all about it and the codes and what they mean.

Ive been systamatically checkin every damn sensor in mine for the last few days.. If ur in brissy by all means bring it down to the workshop and ill have a look at it for ya..

Hey Mate,

That worked a treat...it took me a few times for it to get into that dionostic mode (or whatever you call it)

The engine light stayed off, no problem with the car. YAY!!!!!!!

1 problem solved...now onto the next...stupid clicking noise on the cd player!!!

Thanks again!!

[NA_R33]

No worries buddy.