Jump to content
SAU Community

Hiclone - ? - Another Myth To Grab Average Car People? Snake Oil?


Recommended Posts

I'm assuming this is just like all the other 'Gain power now, save fuel..'

http://www.fuelsaver.com.au/hiclone.php

Thoughts?

After looking through the web site, it all feels like rubbish, but......

From web site....

Turbo Engines

For Turbo vehicles we suggest installing Hiclones in two locations.

The first Hiclone is installed near the intake manifold; after the Turbo or intercooler; to improve combustion and economy.

The second part is installed near the air filter, before the Turbo. This part helps the Turbo Impellor to spin, reducing Turbo lag, bringing the boost in around 400-500rpm earlier.

It is also possible to install extra Hiclones in power or economy positions to further improve the vehicle. We have a lot of customers with up to 6 Hiclones installed on one vehicle.

Please note the line - AFTER THE Turbo ??!!!

Edited by Zebbie

I read an article a little while ago where they tested a bunch of these power enhancing/fuel saving type devices in a stock car on a dyno, and the best you could hope is that they did nothing, most of them restricted some power and one even set the test car on fire :)

surely you jest?!?! I mean look at the fking thing. and the diagrams... ooooh swirling air.... just get out a $100 note and set it on fire. you will get all of the benefits of a hi-con with the potential for engine damage.

i've bought a new RB20E long and i'm building it up to run quad hiclones... should run 9's all day

Edited by joeyjoejoejuniorshabadoo

This is my favourite quote from their website:

The ECU will need time to re-learn (about a week) this is why dyno shops who test products by doing one run without, and one run with any product don't know how to use a dyno on an EFI car.

So basically they are saying everytime you do back to back dyno tests you are wrong, and thats why no one has proof their product actually works.

Utter BS

This is my favourite quote from their website:

The ECU will need time to re-learn (about a week) this is why dyno shops who test products by doing one run without, and one run with any product don't know how to use a dyno on an EFI car.

So basically they are saying everytime you do back to back dyno tests you are wrong, and thats why no one has proof their product actually works.

Utter BS

anything to make a dollah!

I read an article a little while ago where they tested a bunch of these power enhancing/fuel saving type devices in a stock car on a dyno, and the best you could hope is that they did nothing, most of them restricted some power and one even set the test car on fire :D

:w00t:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
    • I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
×
×
  • Create New...