Jump to content
SAU Community

Recommended Posts

hi people, i seriously need some help, i just picked up some work emotions CR KAI for my r32 gtr, they are 18+9.5 all around and the offset is +12 so will they fit on my r32 gtr, please let me know guys and how much are they worth, they come with tyres aswell but please let me know what they are worth and if they will fit, they are in gunmetal grey, cheers tony

Edited by tony_nivin
Link to comment
https://www.sau.com.au/forums/topic/188904-bought-new-wheels-please-help/
Share on other sites

Yes, they will fit, depending on the size of the tyres. The rears will be fine but the fronts may be a bit of a squeeze. Ive got same sized wheels on mine and it fits, but as i said its a squeeze in front.

Probably worth around 2k+ for the wheels alone?

you are kinda correct.

You need to maintain the same rolling diameter (within a few mm). The easiest way to do that is to run the same size tyre front and rear.

He has a 32 gtr as you can't fit that size wheel under a gtst guard without a lot of work

but i heard its no good to run different size tread on the gtr because i wanted to run 245 at the front and 265 or even 275 at the rears, have you got a r32 gtr or a gtst

dont worry about that within reason...when mine was a street car I ran 275/40 rear and 245/45 front and never had a problem

I am running 235s on the front, slightly stretched, but it looks like if i go much wider than 245, i may get some scrubbing problems. Im running 265s on the back no problem.

your rear guards are rolled, aren't they?

or are you running lots of camber?

cheers

nar my rear guards arent roller or anything, i am running 255 all round now and the car is perfect but the wheels are 17s, so i bought 18s and the tyres that im gona get are 245 all around so i think that should be orite, thanks alot guys, cheers tony

I cant comment on handling as the 18x9.5 rims are only my street rims. The tyres came with the wheels when i bought 'em so im just using them until they wear out. In saying that, I have seen several other people using the same combination of tyres on circuit 32gtr's (235/40/18, 265/35/18) so they can't have that adverse an effect on handling, since they have similar rolling diameters anyway. I use 235/45/17 RE55s for the track on 17x8.5" rims.

Ronin_09, my rears aren't rolled, and no massive camber, just some slight natural camber from lowering the car. Why do you ask? Have you had some problems with 265/35/18 tyres on a similiar sized rim?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 12+ months passed so they have no obligation to do a warranty claim. It leaked from the rear circuit. Front circuit was fine, but I tried many times to bench-bleed and in-car bleed (wasted 1L of Penrite racing brake fluid) to no avail. Threw my old BM50 or whatever the standard R32 GT-R BMC is, brakes went back to normal. So from my very limited anecdotal experience, I cannot recommend HFM, even though a lot of their products looks good. Just my experience (I have a genuine Nissan BM57 in a box waiting to be installed now).
    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
×
×
  • Create New...