Jump to content
SAU Community

Skyline Clutch Types

R34GTFOUR
 Share

Recommended Posts

R34GTFOUR Mentor

R34GTFOUR

Posted
Posted (edited)

Hey everyone, i've had a quick read through drivetrain and transmission forum to find some info on the above and came up empty handed so i thought i would start a new topic.

Just chasing a quick run down of the different clutch types and their compatibility between the r32-r34 models.

Correct me if im wrong but my understanding is the early r32 gtrs run a push type then it was changed to a pull type in the later 32 gtrs and the r33-r34 gtrs run the pull type aswell. The r33 gtst series 1 run a push type and that was changed to a pull type in the series 2 r33. And the r34 gtt runs a pull type aswell.

I have a gt-four, which runs the same box as a r33 gtr but has a different bellhousing and runs a push type clutch from what i've been told. So my main question is are all pull types through out the models in skylines interchangable with other pull types and likewise are all the push type clutches interchangable throughout the models with push type.

Just wondering cause if that is so, when i'm shopping around for a clutch i will just search for a r33 gtst push type since noone knows anything about gt-fours and it just confuses people.

Cheers for the help :rofl:

Edited by R34GTFOUR
Link to comment
https://www.sau.com.au/forums/topic/189428-skyline-clutch-types/
Share on other sites
Abo Bob Grand Master

Abo Bob

Posted
Posted
Hey everyone, i've had a quick read through drivetrain and transmission forum to find some info on the above and came up empty handed so i thought i would start a new topic.

Just chasing a quick run down of the different clutch types and their compatibility between the r32-r34 models.

Correct me if im wrong but my understanding is the early r32 gtrs run a push type then it was changed to a pull type in the later 32 gtrs and the r33-r34 gtrs run the pull type aswell. The r33 gtst series 1 run a push type and that was changed to a pull type in the series 2 r33. And the r34 gtt runs a pull type aswell.

I have a gt-four, which runs the same box as a r33 gtr but has a different bellhousing and runs a push type clutch from what i've been told. So my main question is are all pull types through out the models in skylines interchangable with other pull types and likewise are all the push type clutches interchangable throughout the models with push type.

Just wondering cause if that is so, when i'm shopping around for a clutch i will just search for a r33 gtst push type since noone knows anything about gt-fours and it just confuses people.

Cheers for the help :worship:

R32 GTR push

Late R32 GTR pull

R33 GTR pull

R34 GTR pull but with different flywheel

R32 GTST push

R33 GTST push

R34 GTT pull

R34 GTfour chance of being a pull just like the GTT is extremely high.

R34GTFOUR Mentor

R34GTFOUR

Posted
  • Author
Posted
quick questions as well, are the clutches interchangeable between the R33gtr 98' and R34s?

I'm 99% sure that they are.

Just got my clutch confirmed in the gt-four as a PUSH type and it is interchangeable with the early r32 gtr and r33 gtst. The reason i say the r33 gtr and r34 gtt's are interchangeable is if my push type clutch can be used in the gt-four, r32 gtr and gtst then i would assume the pull types are interchangeable (except the r34 gtr)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...