Jump to content
SAU Community

Recommended Posts

heys, i've done a search but wouldn't find anything..

basically i've noticed a few of you have bought cars from over east. would like to know how you did it.

ie did you fly over to have a look?, how was the car shipped over, wat company and how much.

feel free to pm any bad points too :rofl:

am finking of buying a car from the east and would like to know ur experiences.

cheers

johan

Link to comment
https://www.sau.com.au/forums/topic/189436-bringing-a-car-over-from-the-east/
Share on other sites

Hey mate,

As Gazza pointed out, it has been covered previously. Did a quick search and found this thread...

http://www.skylinesaustralia.com/forums/t177361.html

Hope that gives you some info.

Cheers

Brad

Well you have posted the question now.

Too things.

1. Good idea, you will save heaps on purchase price and there is heaps of variety. The savings on Stamp Duty alone paid for 2 way airfair. You must have the seller agree to let you use there address to register the car in your name (but at there address) in order to pay Eastern S/duty rate. (on 50k, there is approx $1500 difference from melb 2 perth)

2.Transport cost $750ish with Toll/TNT. dont believe them when they say you will get your car in 5 days.....generally 2-3 weeks by inclosed train carriage.

Sight the vehicle yourself.....dont fall for letting the seller get an M.O.T. inspection. The MOT insp doesnt seem to pick up on much......i.e. accident damage.

hope that helps.

hey mate i lined up a car that i thought was sweet, the seller agreed to a deposit, i flew over to melbourne bought the car drove it to adelaide(why not) put it on a truck flew home about 1.5 weeks later the car was sitting on my drive way best idea ever, got a little holiday travel time and a better car.

i got r32 pretty modded like fmic, exedy race clutch and other random shiz for $9000

flights there and back $500

petrol food shelter ect ~$300

truck home $850

total ~$10700

for a car that i could sell tomoro for 13

truck company are fully insured think they are "moving cars" they work through TNT

I recently bought one from Sydney. Transport company was moving cars, who most people have said use TNT/Ceva Logistics. Paid $1200 for pickup from the guys house in Syd then delivered to the depot here in Perth. Can't fault their service and it was delivered within about 8 days, pretty quick!

Didn't fly over to check it out, but if you've got time I'd recommend lining up a few cars that you are really keen on and going over there yourself and taking a look. Might want to try to get the stock parts with the car (if it's modded) so you have the option of fitting them to take it over the pits.

Edited by brynj

When i imported from jap, i got my compliance done in sydney. One of my mates told me that some cars that get trained over sometimes get a little damage due to the lil abo's on the nullarbor which through stones at the cars when the trains go past. (trying not to be races!) So i got mine shipped with seaway logistics which also cost around $700-$750 and roughly takes 2weeks, choice is yours really!!

hey mate i lined up a car that i thought was sweet, the seller agreed to a deposit, i flew over to melbourne bought the car drove it to adelaide(why not) put it on a truck flew home about 1.5 weeks later the car was sitting on my drive way best idea ever, got a little holiday travel time and a better car.

i got r32 pretty modded like fmic, exedy race clutch and other random shiz for $9000

flights there and back $500

petrol food shelter ect ~$300

truck home $850

total ~$10700

for a car that i could sell tomoro for 13

truck company are fully insured think they are "moving cars" they work through TNT

Totally agree, i bought a car in melb from a company that has regular 1st/2nd page ads in HPI & lots of wank about quality & backup ect & ended up paying too much for a car that didnt have half the stuff i payed for on it & was told u got a good deal, so stiff shit! If i flew over & looked at the car myself i never would of bought it...

So many good cheap cars over there if you went for a few days u could find one no worries :turned:

hey dude i just got my 32 from qld,cost me $1900 to get it here in a sea container with civa tnt,,didnt bother to fly and check it out i just took the guys word the car was sweet,and oh it was,very happy,the only damage was a very slight scrap on the front bar from getting it in the container,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...